300 Series Double Coated Tapes

General Purpose Double-Coated White Flat Paper Tape

Model # 300

Double-coated, white flat paper tape with an aggressive, rubber-based adhesive and a siliconized, wrinkle resistant release liner. Offers good tensile strength and superior adhesion to a variety of substrates. For general purpose mounting, holding, splicing, tabbing and fastening of a variety of substrates. Meets Spec: C.I.D. A-A-180C, Type II, Grade B.

Industrial Holding Double-Coated Cloth Tape

Model # 301

Double-coated (polyester/cotton) cloth tape with high tack and a synthetic adhesive, primarily used for industrial holding, mounting, splicing, and carpet installation. Is conformable and adheres to smooth and irregular surfaces. Primarily used for industrial holding, mounting, splicing and carpet installation. Can also hold signs and dispensers for POP merchandising.

Stabilized Acrylic Transfer Film

Model # 304

Stabilized, acrylic transfer with a Kraft release line designed to meet the demanding end use requirement for high speed flying splice. This tape has excellent adhesion to paper, plastic films, metal foils, etc. and excellent holding power at elevated oven temperatures. Very easy unwind and removal of liner allows for ease of application. Specifically designed to meet the demanding end use requirement of high speed flying splice; mounting of nameplates, splicing, framing and matting.

High Performance Acrylic Transfer Film

Model # 305

High performance acrylic transfer film with a Kraft release liner. It is designed to provide excellent adhesion and long term aging on a wide variety of surfaces and urethane foams. This tape has ultra-high anchorage to urethane foams and good adhesion to many metals and plastics. Performs well over a wide temperature range and offers excellent humidity and water resistance. Specifically designed to provide excellent adhesion and long term aging on a wide variety of surfaces, laminating to foam for gasketing and sound attenuation; application of decorative parts and mounting of rubber extrusions.

Double-Coated Polyester Film

Model # 306

0.5 mil, double-coated polyester film with ultra-high tack and moderate shear with a rubber adhesive. The adhesive is designed for bonding to a wide variety of polyurethane and polyethylene foams, felt, rubber, sponge, cork, abrasive materials, and gasket materials. The liner side adhesive bonds well to most substrates at room temperature and exhibits high initial tack and high peel strength. Use of heat and pressure will help to increase the initial bond of the product to substrate. For bonding to polyurethane, polyethylene foams and various other grades of felts, sponges and cork; mounting, splicing, laminating and holding applications.

Double-Coated Polyester Film (Acrylic Adhesive)

Model # 307

0.5 mil double-coated polyester film with an acrylic adhesive for use in indoor/outdoor signs and posters, splicing of paper, plastic materials and foam, laminating and graphic arts applications.

Double-Coated Splicing Tape (Non-Woven Tissue)

Model # 308

Double-coated splicing tape with non-woven tissue backing and acrylic adhesive. It offers excellent resistance to light and aging, as well as high shear and temperature resistance. Splicing of paper and cardboard for the corrugated industry.

Double-Coated High Speed Splicing Tape

Model # 309

Double-coated, hand tearable tape with a polyester carrier and red, high tack acrylic adhesive. Offers excellent adhesion in cold temperatures and good shear and heat resistance. Excellent for high speed splicing of paper, plastic, films, and fiberboard. Red color allows visual identification of splices.

Double-Coated Polyethylene Film Tape

Model # 310

Double-coated, white polyethylene film with a permanent rubber adhesive. The thin profile of the tape allows conformability and permanency. Excellent for general purpose double-coated applications and carpet hold down.

Temporary Double-Coated Polyester Film Tape

Model # 312

0.5 mil double-coated, polyester film with two different rubber adhesives. For temporary mounting and holding applications, which require a cleanly removable adhesive.

Double-Coated Vinyl Plate Mounting Tape

Model # 314

Double-coated vinyl that unwinds smoothly, despite its thickness, to ensure easy cylinder coverage. The high adhesion and good shear resistance of this tape ensures that there is no plate movement or edge lift problems, even at high speeds and on extended print runs. Designed specifically for use in mounting of printing plates in Flexographic printing.

Double-Coated BOPP Film Tape

Model # 315

Double-coated, 0.75 mil, biaxially-oriented polypropylene film with a permanent rubber adhesive system and is excellent for high strength core start-up and a variety of splicing, holding, or mounting. Other applications include holding, mounting, laminating and attaching decorative trim.

Premium Double-Coated Flatback Paper Tape

Model # 316

Bleached flatback paper product coated with a high shear resistant pressure-sensitive natural rubber/resin adhesive on both sides that bond equally as well to almost any surface. White colored easy release treated crepe paper liner allows for either machine or hand application. A recognized standard in the manufacture and repair of golf club grip application. Used for mounting rubber printing plates and splicing, installation of golf club grips, textile manufacturing (“twister room”), and  photograph mounting. Bonds to almost any surface. Meets Spec: UU-T-91D, Type II.

Double-Coated Polyester Film Tape

Model # 317

Double-coated 0.5 mil polyester film with an acrylic adhesive. Its high performance adhesion allows for more demanding splicing, bonding, and nameplate application.

Double-Coated Saturated Flatback Rope Paper Tape

Model # 318

Double-coated saturated flatback rope paper with high shear, high tensile strength, and a high tack, permanent adhesive system that allows for permanent and semi-removable applications. Used in printing and corrugated industries for splicing operations, mounting rubber and plastic printing plates, holding wood cuts and dies, core start-up and end-tabbing, and applications requiring conformability and strength.

Double-Coated Lightweight Tissue Paper Tape

Model # 320

Double-coated lightweight tissue paper with high adhesion and a rubber adhesive. Its thin composition allows it to be conformable to the applicable surface. For general purpose bonding and splicing operations requiring a thin, conformable tissue reinforced tape.

General Purpose Double-Coated Crepe Paper Tape

Model # 321

General purpose grade, double-coated 3.5 mil crepe paper tape with a synthetic-based adhesive with ultra-high tack and moderate shear properties. This tape is designed for applications where good tensile strength is needed. For use in parts machining, where removal of tape is essential and core start-up.

Double-Coated Transparent Polyester Film Tape

Model # 322

Double-coated, transparent polyester film with a pink polypropylene release liner. The acrylic adhesive offers reliable bonding, even to low surface energy substrates and very high bonding strength immediately after assembly. Applicable for most demanding applications including heavy stress, high temperatures, or critical substrates. Applications include mounting of plastic, metal, or wood; mounting ABS plastic parts in car industry; self-adhesive mounting of rubber/EPDM profiles; and mounting battery packs, lenses, and touch-screens in electronic devices. Recognized according to UL standard 969. UL file: MH 18055.

5.9 Mil Utility Double-Coated Vinyl Tape

Model # 324

Thin, flexible vinyl (PVC) film coated on both sides with an aggressive pressure-sensitive natural rubber adhesive. Excellent adhesion properties and good initial tack allowing immediate, permanent bond to a variety of surfaces (including irregular and porous surfaces). Features an easy release treated/moisture resistant flatback liner (white). Applications include high adhesion splicing and mounting, sign positioning and carpet tape (hold-down and position), mirror manufacturing, engravers (temporary holding), insulation (holding for metal building construction).

General Purpose Double-Coated Linerless PVC Film Tape

Model # 325

Double-coated PVC film with no liner and adhesive on both sides that is balanced so that the tape can be unwound easily, even after long periods in storage. Applications include general purpose bag closing; label attachment; mounting of light weight parts; splicing of various materials such as plastic, metal foils, paper, and cardboards; and closure system even for thin film bags.

Double-Coated UPVC Film

Model # 326

Double-coated UVPC film with an exceptionally high tack, high peel, acrylic adhesive and is supplied with a 60 pound kraft release liner. It bonds well to rough or porous surfaces and exhibits excellent adhesion to ether and ester foams. Excellent resistance to environmental extremes and high adhesive mass provides excellent gap-filling properties. Joins extruded plastic and metal components, bonds to rough or porous surfaces, bonds EPDM rubbers and urethane foams. Also for difficult bonding and splicing applications and product assembly.

Double-Coated Vinyl Tape

Model # 328

Double-coated vinyl tape with soft PVC backing designed for use in wide web flexographic printing, particularly for solid areas and line work. Unwinds smoothly, despite its thickness, to ensure easy cylinder coverage. The high adhesion and good shear resistance of this tape ensures that there is no plate movement or edge lift problems, even at high speeds and on extended print runs. It is made to the tightest thickness tolerances to ensure accurate printing results. The embossed PP liner prevents the formation of air pockets when plate mounting. Applications include, high performance mounting of photopolymer and rubber plates in Flexographic printing and high speed and extended print runs.

Double-Coated High Density Urethane Foam Tape

Model # 330

Double-coated, 1/32” thick, high density urethane with high tack and aggressive acrylic adhesive. It is available in various performance grades and is ideal for a variety of electronic and general bonding applications (off-white, gray, or black colors). It is also available in 1/16” thick (#331) and 1/8” thick (#332). This tape meets various “big three” automotive specs and is UL listed as an electrical component (UL746C). Engineered to high shear applications, mounting, and nameplates and used in high performance industrial and automotive bonding.

Double-Coated High Density Urethane Foam Tape

Model # 331

Double-coated, 1/16” thick, high density urethane with high tack and aggressive acrylic adhesive. It is available in various performance grades and is ideal for a variety of electronic and general bonding applications (off-white, gray, or black colors). It is also available in 1/32” thick (#330) and 1/8” thick (#332). This tape meets various “big three” automotive specs and is UL listed as an electrical component (UL746C). Engineered to high shear applications, mounting, and nameplates and high performance industrial and automotive bonding.

Double-Coated High Density Urethane Foam Tape

Model # 332

Double-coated, 1/8” thick, high density urethane with high tack and aggressive acrylic adhesive. It is available in various performance grades and is ideal for a variety of electronic and general bonding applications (off-white, gray, or black colors). It is also available in 1/32” thick (#330) and 1/16” thick (#331). This tape meets various “big three” automotive specs and is UL listed as an electrical component (UL746C). Engineered to high shear applications, mounting, and nameplates and high performance industrial and automotive bonding.

Double-Coated 0.5 Mil Polyester Film Tape

Model # 333

Double-coated 0.5 mil polyester film that exhibits all the positive results associated with a high quality general purpose acrylic system. It has excellent resistance to oils, plasticizers, and ultraviolet light and withstands higher temperatures than rubber-based adhesive systems. Product exhibits resistance to some plasticizers and adhesion is excellent to a very wide variety of substrates. Features excellent peel and shear; bonds well to most papers (splicing); excellent tack; die cuts cleanly; bonds well to most surfaces. Used for bonding of plastic materials for signs and posters, nameplates and general purpose bonding, and low outgassing product.

Double-Coated 1.0 Mil BOPP Film Tape

Model # 335

Double-coated, 1mil, biaxially-oriented, polypropylene film with an aggressive, red-colored adhesive. It’s designed to easily identify splices. Designed for easy to identify splicing in paper, films and a variety of substrates; developed for continuous web where a visual splice is critical.

Double-Coated High Density Polyurethane Foam Tape

Model # 337

Double-coated, high-density, 1/32” thick, gray polyurethane foam tape with a high performance adhesive. Ideal for a wide variety of transportation bonding and joining application. Coated on two sides with an acrylic adhesive and bond strength of the adhesive builds slowly which allows the installer to reposition parts (repositioning of parts depends on time, temperature, and pressure). Designed to provide good low temperature flexibility, superior adhesion to stainless steel; painted steel; and acrylics, and excellent resistance to weather. It is also available in 1/16” (#338) and 3/64” (#339). Applications include automotive cushioning, sound absorption, gasketing, and sealing.

Double-Coated High Density Polyurethane Foam Tape

Model # 338

Double-coated, high-density, 1/16” thick, gray polyurethane foam tape with a high performance adhesive. Ideal for a wide variety of transportation bonding and joining application. Coated on two sides with an acrylic adhesive and bond strength of the adhesive builds slowly which allows the installer to reposition parts (repositioning of parts depends on time, temperature, and pressure). Designed to provide good low temperature flexibility, superior adhesion to stainless steel; painted steel; and acrylics, and excellent resistance to weather. It is also available in 1/32” (#337) and 3/64” (#339). Used for automotive cushioning, sound absorption, gasketing, and sealing.

Double-Coated High Density Polyurethane Foam Tape

Model # 339

Double-coated, high-density, 3/64” thick, gray polyurethane foam tape with a high performance adhesive. Ideal for a wide variety of transportation bonding and joining application. Coated on two sides with an acrylic adhesive and bond strength of the adhesive builds slowly which allows the installer to reposition parts (repositioning of parts depends on time, temperature, and pressure). Designed to provide good low temperature flexibility, superior adhesion to stainless steel; painted steel; and acrylics, and excellent resistance to weather. It is also available in 1/32” (#337) and 1/16” (#338). Used for automotive cushioning, sound absorption, gasketing, and sealing.

Double-coated, black polyurethane; automotive grade

Model # 343

“Double-coated, 1/16″” thick, black polyurethane; automotive grade, high performance adhesive. Used in the automotive industry for mounting, joining, vibration absorption, gasketing and sealing.”

Double-coated, black polyurethane; automotive grade

Model # 344

“Double-coated, 3/64″” thick, black polyurethane; automotive grade, high performance adhesive with higher quick stick than #342. Used in the automotive industry for mounting, joining, vibration absorption, gasketing and sealing.”

Double-coated polyester

Model # 347

Double-coated polyester carrier; removable acrylic adhesive on liner side/rubber adhesive on exposure side. For mounting of artwork and other temporary bonding applications; temporary labels and window decals.

Double-coated, medium density, UV resistant, closed cell PVC foam

Model # 350

Double-coated, 1/32” thick, medium density, closed cell PVC foam tape with a rubber adhesive. It offers UV resistance and sound dampening properties. The foam density permits clean die-cuts and faster penetration. Used for sound dampening, gasketing, shock absorption cushion. Standard two-sided adhesive glazing tape. Displaces wet sealant and butyls. Excellent Strength and wear resistance. Also available in 1/16” thick (#351), 1/8” thick (#352), 1/8” thick FR (#353), and 1/4” thick (#354).

Approved to AAMA 810.1 expanded cellular glazing tapes.

Double-coated, medium density, UV resistant, closed cell PVC foam

Model # 351

Double-coated, 1/16” thick, medium density, closed cell PVC foam tape with a rubber adhesive. It offers UV resistance and sound dampening properties. The foam density permits clean die-cuts and faster penetration. Applications include sound dampening, gasketing, shock absorption cushion. Standard two-sided adhesive glazing tape. Displaces wet sealant and butyls. Excellent Strength and wear resistance. Also available in 1/32” thick (#350), 1/8” thick (#352), 1/8” thick FR (#353), and 1/4” thick (#354).

Approved to AAMA 810.1 expanded cellular glazing tapes

Double-coated, medium density, UV resistant, closed cell PVC foam

Model # 352

Double-coated, 1/8” thick, medium density, closed cell PVC foam tape with a rubber adhesive. It offers UV resistance and sound dampening properties. The foam density permits clean die-cuts and faster penetration. Applications include sound dampening, gasketing, shock absorption cushion. Standard two-sided adhesive glazing tape. Displaces wet sealant and butyls. Excellent Strength and wear resistance. Also available in 1/32” thick (#350), 1/16” thick (#351), 1/8” thick FR (#353), and 1/4” thick (#354).

Approved to AAMA 810.1 expanded cellular glazing tapes

Double-coated, medium density, UV resistant, closed cell PVC foam

Model # 353

Double-coated, 1/8” thick, flame retardant, medium density, closed cell PVC foam tape with a rubber adhesive. It offers UV resistance and sound dampening properties. The foam density permits clean die-cuts and faster penetration. Applications include Sound dampening, gasketing, and shock absorption cushion. Standard two-sided adhesive glazing tape. Displaces wet sealant and butyls. Excellent Strength and wear resistance. Also available in 1/32” thick (#350), 1/16” thick (#351), 1/8” thick (#352), and 1/4” thick (#354).

Approved to AAMA 810.1 expanded cellular glazing tapes.

 

Double-coated, medium density, UV resistant, closed cell PVC foam

Model # 354

Double-coated, 1/4” thick, medium density, closed cell PVC foam tape with a rubber adhesive. It offers UV resistance and sound dampening properties. The foam density permits clean die-cuts and faster penetration. Applications include sound dampening, gasketing, and shock absorption cushion. Standard two-sided adhesive glazing tape. Displaces wet sealant and butyls. Excellent Strength and wear resistance. Also available in 1/32” thick (#350), 1/16” thick (#351), 1/8” thick (#352), and 1/8” thick FR (#353).

Approved to AAMA 810.1 expanded cellular glazing tapes.

Double-Coated Foam Gasketing Tape

Model # 358

Double-coated tissue with an extremely aggressive acrylic adhesive. Supplied with a 60 pound kraft release liner. Offers exceptionally high tack and peel while the tissue carrier adds strength and dimensional stability and conformability. Bonds well to low surface energy plastics and ether and ester foams. Excellent resistance to environmental extremes. Used for foam gasketing and sound attenuation; bonds EPDH rubber and some plastic materials.

Double-Coated Polyethylene Foam Tape

Model # 360

Double-coated 1/32” thick polyurethane foam tape with high performance acrylic adhesive. Used for glazing tape sound attenuation, gasketing, vibration dampening, and decorative trim. Also available in 1/16” thick (#361) and 1/8” thick (#362).

Double-coated Polyethylene Foam Tape

Model # 361

Double-coated 1/16” thick polyurethane foam tape with high performance acrylic adhesive. Used for glazing tape sound attenuation, gasketing, vibration dampening, and decorative trim. also available in 1/32” thick (#360) and 1/8” thick (#362).

Double-Coated Polyethylene Foam Tape

Model # 362

Double-coated 1/8” thick polyurethane foam tape with high performance acrylic adhesive. Used for glazing tape for sound attenuation, gasketing, vibration dampening, and decorative trim. Also available in 1/32” thick (#360) and 1/16” thick (#361).

2 lb. density, cross-linked, white polyethylene foam

Model # 373

“1/8″” thick; 2 lb density, cross-linked, white polyethylene foam; high tack, high shear, synthetic rubber adhesive. For mounting applications, nameplates, point-of- purchase displays, reflectors and other surfaces.”

6.0 Mil Medium Grade Double-Coated Paper Tape

Model # 382

A beige crepe paper tape coated on both sides with an aggressive, pressure-sensitive natural rubber adhesive that bonds equally well on both sides to almost any surface. Features an easy release treated white crepe liner. Used for Photograph mounting, carpet installation, steel-rule die (make ready), textile manufacturing (twister room), printing industry, and any application that requires the joining of two surfaces.