Film, Foil & Electrical Tapes

High Temperature Anti-Static Masking

Model # 42

A 2.2 mil. anti-static masking tape used to mask, hold or protect sensitive electronic components. 42 tape represents a breakthrough in PSA tape technology. This product may be used at static safeguarded workstations as part of your total static control program. When 42 tape is used in high temperature applications, it should be removed by pulling back over itself 180°. The substrate should also be allowed to cool to room temperature. This tape neutralizes triboelectrically generated charges at the instant of separation of surfaces. It also generates very low levels of static charge, even in dry conditions of 10% R.H. 42 tape is opaque with gold tint for easy indentification and differentiation for standard high temperature tapes. Plastic anit-static cores are available to minimize particulate contamination in clean work areas.

Polyester Film with Rubber Adhesive

Model # 57

A 2.0 mil. tape consisting of a transparent polyester film with thermosetting rubber adhesive primarily used for coil covers and as insulation. Like all 3M insulating tapes, 57 tape is available in standard and custom widths and lengths.

PE Film Tape

Model # 118

***DISCONTINUED BY COVALENCE*** 118 is a polyethylene film tape, primarily used for easy and quick applications in splicing operations when extruding, printing or treating PE films.

PE Coated Cloth

Model # 159

159 is a polyethylene coated cloth, primarily used for multi-purpose industrial applications.

Polyethylene-Coated Moisture Barrier Tape

Model # 281

281 is an 11 mil polyethylene moisture barrier tape used as a moisture barrier in automotive, appliance and marine manufacturing, wire harness splice insulation and spot taping.

Double Coated Polyester Film

Model # 333

FT 333 is a 4.7 mil, double coated polyester film. It is primarily used to bond to polyurethane foams, sponge rubber, metal and plastic parts. where high adhesion is required. Specification #46411

Heavy Duty Protective Tape

Model # 346

346 is a 16.7mil, heavy duty natural colored flat stock paper tape. It can be used for indoor and outdoor protection of many metals, plastics and materials in transit. This product also features a heavy duty weather resistant backing.

Thermosetable Glass Cloth Tape

Model # 365

An 8.3 mil. thermosetable rubber-resin adhesive coated onto a glass cloth backing for many applications requiring high adhesion and a very strong conformable backing. This adhesive provides good initial adhesion and tack. When subjected to a thermosetting cycle it will crosslink, providing greater adhesion and bonding, higher solvent resistance and higher heat resistance. Thermosetting is frequently achieved by ironing or heating the backing once the tape is applied. High adhesion is obtained by optimizing the time, temperature and pressure of the heat applied.

HVAC Tape

Model # 395

Scotch 395 is a 10.0 mil, HVAC tape. It is primarily used in heating, ventilating and air conditioning.

Foil/Glass Tape

Model # 409

409 is a 8.5 mil, aluminum foil/glass fabric laminate with a high temperature silicone adhesive. The aluminum foil provides excellent reflective and conductive characteristics in high temperature applications. The silicone adhesive provides excellent adhesion at high temperature yet will remove cleanly. They are used primarily as masking tapes in plasma flame spraying. They are also used in applications requiring heat shielding, such as harness wraps.

Lead Foil Tape (Linered)

Model # 420

A 6.8 mil. nominal lead foil backing combined with a rubber adhesive and a clear, easy-release film liner used as a barrier and maskant. Tape has good thermal properties and will perform over a wide variety of temperature conditions (-60°F to 225°F). It has been used at higher temperatures for shorter durations. This material when disposed of separately is classified as RCRA hazardous waste. Consult applicable Federal, State and local regulations for proper disposal. Elevated lead levels in water may result from long term submersion of this product. Best results for application are obtained when applied to a clean and dry surface above 32°F. Also, by “feathering” the edges – rubbing the tape down with a smooth edged plastic piece (or similar object) – the tape can be made to better conform to the substrate. This is especially important if the tape is to be used as a “thief” in electroplating where the edges must fully contact the metal base.

Lead Foil Tape

Model # 421

3M421 is a 6.3 mil. lead foil backing with a rubber adhesive used as a maskant in electroplating and chemical milling and as a moisture and radiation barrier in certain applications. 421 tape has very good conformability, easier and faster to work with than linered lead foil. It also has good thermal properties and will perform over a wide variety of temperature conditions (-65°F to 225°F). It has been used at higher temperatures for shorter durations. Tape is electrically and thermally conductive. Elevated lead levels in water may result from long term submersion of this product. Best results are obtained when applied to a clean and dry surface above 32°F. Also, by “feathering” the edges, rubbing the tape down with a smooth edged plastic piece (or similar object), the tape can be made to better conform to the substrate. This is especially important if the tape is to be used as a “thief” in electroplating where the edges must fully contact the metal base. To obtain best performance, use this product within 12 months from date of manufacture and store under normal conditions of 60°F to 80°F and 40% to 60% relative humidity in the original carton. Disposal and sfety considerations: *Wear protective gloves and/ or wash hands after working with tape. *Lead will slowly leach into water when submerged, leaching will accelerate as acidity increases. *This material, when disposed of separately, is classified as RCRA hazardous waste, please consult applicable Federal, State and local regulations for proper disposal.

Double Coated Glass Cloth

Model # 468

468 is a 7 mil, glass cloth tape with an aggressive silicone adhesive on both sides. This tape is designed for high temperature plasma and flame spray masking. The use of an overlay when grit blasting may be needed. The overlap end is designed not to lift at high velocity grit blasting or thermal spray.

Splicing Tapes

Model # 469

469 is a 5.5 mil high tack, high temperature double coated tissue tape. It is light red in color for visible splices. The medium firm adhesive features good quick stick for high-speed flying splices on most grades of paper and excellent heat resistance for many high temperature drying ovens.

Electroplating Tape

Model # 470

A 7.1 mil. conformable and abrasion resistant vinyl tape. 3M’s 370 tape has excellent resistance to most chemicals used in typical electroplating processes. This tape also can be qualified to meet the government spec. HH-T-0025 (GSA-FSS). Prolonged exposure to elevated temperatures (above 170°F) and hot caustics may cause weakening of the adhesive bond. While 470 tape resists most common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons, and esters, found in lacquer thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. To obtain best performance of tape, use within 12 months from date of manufacture and store under normal conditions of 60°F to 80°F and 40% to 60% relative humidity in the original carton.

Vinyl Tape

Model # 471

A 5.2-5.4 mil. clear vinyl plastic film tape with a rubber adhesive used for many color coding, abrasion protection, decoration, sealing, patching, splicing, wrapping and general purpose applications and also is excellent for many lane marking applications. Pigmented backing maintains vivid colors, even when exposed to heavy abrasion. Conformability and dead stretch properties of this tape are ideal for taping, wrapping or sealing many curved or irregular surfaces. While 471 tape resists many common solvents, tape should not be exposed to ketones, chlorinated hydrocarbons and esters found in lacquer thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. 471 is available in ten other colors. However, the properties of the colored tapes do change.

Transparent Vinyl Tape

Model # 477

3M477 is a 7.2 mil. conformable transparent vinyl backing with a rubber adhesive ideal for many heavy duty protection applications, as well as masking and splicing. Best results are attained when applied to a clean, dry surface at temperatures between 60°F to 80°F. Conformability and dead stretch properties make 477 tape ideal for taping or sealing many curved and irregular surfaces. The thick backing is ideal for application which require abrasion protection. While 477 tape resists most common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons and esters that are found in lacquer thinners, degreasers, paint strippers, etc. which may cause the backing to swell or curl. Avoid using on highly plastized materials which may result in adhesive softening and potential adhesion failure. To obtain best tape performance, use within 12 months from date of manufacture and store under normal conditions of 60°F to 80°F and 40% to 60% relative humidity in the original carton.

Polyethylene Splicing & Sealing Tape

Model # 480

3M480 is a 5.1 mil. transparent polyethylene backing with a long aging transparent acrylic adhesive used for splicing polyethylene sheeting, as well as many miscellaneous protecting and sealing. Polyethylene backing provides good chemical and solvent resistance. Extremely conformable for wrapping, patching and for used on compound curves. Good abrasion resistance. Remains flexible to -20°F. Prolonged exposure above 170°F and hot caustics may cause softening of backing and weaken bond of adhesive to backing. Best results are attained when applied to a clean, dry surface at temperatures between 60°F to 80°F. To obtain best tape performance, use within 12 months from date of manufacture and store under normal conditions of 60°F to 80°F and 40% to 60% relative humidity in original carton.

Preservation Sealing Tape

Model # 481

A 9.8 mil. black polyethylene backing with a unique rubber adhesive that provides excellent performance as an indutrial and military preservation tape. Tape can be applied from freezing to 120°F, removed at 0°F and performs from -65° to 160°F. Tape also may be easily dispensed from the H128 hand dispenser. 481 conforms to many irregular surfaces and has excellent stain resistance. Tape is also effective for many outdoor applications in hot and cold weather over two years with quick, clean removal. 481 tape meets military spec. MIL-T-22085 Amendment 3, Type 2.

Polyethylene Tape

Model # 483

3M483 is a 5.3 mil. various colored polyethylene backing with a rubber adhesive tape used for many general purpose applications. 483 tape has low sulfur and halogen content and streches easily and is highly conformable. The polyethylene backing provides good solvent resistance properties and remains flexible to -20°F. 483 tap should not be exposed to temperatures which exceed 170°F. Exposure to such temperatures may result in softening of backing. The vivid colors and smooth backing provide an excellent glossy appearance. Best results are attained when applied to a clean and dry surface at temperatures between 60°:F to 80°F. To obtain best performance, use this product within 12 months from date of manufacture and store under normal conditions of 60°F to 80°F and 40% to 60% relative humidity in the original carton.

Aluminum Foil FSK Tape

Model # 491

491 is a foil, skrim and kraft combined with an all weather rubber adhesive to maximize insulation integrity. It is used for sealing cold and dual temperature duct seams and joints where FSK is the basic insulation facing. The skrim bends with the primary facing and gives a strong, finished look. 491D is the same product in circular disc form provided on a continuous roll.

Glass Cloth/Foil Masking Tape

Model # 496

D/W 496 is a 14 mil, glass cloth/aluminum foil masking tape used in plasma flame spraying. These layers are laminated “double-ply” of silicone rubber, glass cloth, aluminum foil & coated with a high temperature silicone adhesive. It is used when a single ply tape will not provide sufficient protection. The double ply construction eleminates the need for two hand layup operations, thus saving labor cost.

Flame Spray Masking Tape

Model # 497

497 is a 11 mil white silicone rubber coated glass fabric with a high temperature silicone adhesive. The silicone rubber is tough and abrasion resistant to withstand high temperatures and grit blasting impact. It is clean removable.

High-Temperature Glass Tapes

Model # 498

498 is a 22 mil, double ply of silicone rubber, aluminum foil and glass cloth used as a masking tape in plasma flame spraying when a single ply tape will not provide sufficient protection. The double ply construction eleminates the need for two hand layup operations thus labor costs.

Plasma Spray Masking Tape

Model # 500

500 is a 11 mil, one step plasma masking tape constructed of a silicone rubber/glass cloth backing coated with an aggressive high-temperature silicone adhesive. It will withstand grit blast and plasma spray process yet will remove cleanly. 500 has a higher tack than most other plasma masking tapes which allows it to easily conform to the most complex shapes of the Aircraft Industry. It is used as a one step masking tape in plasma flame spraying. It provides superior high temperature protection during both grit blasting and plasma metallization operations.

Gaffer's Tape

Model # 585

***DISCONTINUED BY COVALENCE*** 585 is a 11.5mil, vinyl-coated tape, primarily used for wire hold-down, color coding, marking film canisters, bookbinding, and bus seat repair. Waterproof, low gloss, non-reflective cloth backing. High adhesion product for good hold.

Double Coated Vinyl

Model # 597

597 is a 5.9 mil, thin, flexible vinyl (PVC) film, coated on both sides with an aggressive natural rubber pressure-sensitive adhesive. It has excellent adhesion properties and good initial tack allowing immediate, permanent bond to a variety of surfaces (including irregular and porous surfaces). #597 features a double-coated easy release treated moisture resistant flatback liner (white). This product is not re-pulpable. It is used for mounting novelties and promotional items, sign positioning, splicing, carpet, mirror manufacturing, engravers (temporary holding), insulation (holding for metal building construction), and any application that requires the joining of two surfaces.

PE Film Tape

Model # 600

***DISCONTINUED BY COVALENCE*** 600 is a 3.3mil, polyethylene film tape, primarily used for freezer and refrigerator liner insulation to prevent PU foam from penetrating between the coils and inner liner wall. The back side of the tape is treated to assure good adhesion of the foam to the film.

Riveters Tape

Model # 685

685 is a 1.7 mil zone-coated polyester film tape with a tack-free center “window” for use in holding rivets in place both prior to and during riveting.

Riveters Tape

Model # 695

695 is a white, 3.0 mil (0.076 mm) polyethylene film tape with a tack-free center window for use in holding aircraft rivets in place prior to and during riveting.

Cloth Insulating Tape

Model # 720

IT720 is a 8 mil, woven polyester cloth used for coiling and transformer wrapping.

Cloth Insulating Tape

Model # 730

IT730 is a 7 mil, glass cloth tape used for coil wrap/banding & crossover insulation.

General Purpose Vinyl Tape

Model # 764

3M764 is a general purpose vinyl tape for use in non-critical applications such as color coding, bundling and safety marking, etc. While vinyl tapes resist more common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons and esters found in lacquets, thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. Best results are attained when applied to a clean, dry surface at temperatures between 60°F to 80°F. To obtain best performance, use this product within 12 months from date of manufacture and store under normal conditions of 60°F to 80°F and 40% to 60% relative humidity in the original carton.

General Purpose Vinyl Tape

Model # 765

A 5.0 mil. tape consisting of a polyvinyl-chloride backing with a rubber adhesive primarily used for protection, temporary marking and general purpose applications. 765 is a vinyl tape for use in non-critical applications such as color coding, safety marking, bundling, etc. While vinyl tapes resist most common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons and esters found in lacquer thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl.

Hazard Marking Vinyl Tape

Model # 766

A 5.0 mil. polyvinylchloride backed tape with rubber adhesive used for marking/ warning purposes and temporary floor markings. Printed in black and yellow stripes, 766 is a general purpose hazard marking vinyl tape for use in non-critical applications. While vinyl tapes resist most common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons and esters found in lacqure thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl.

Single-Coated High Temperature Splicing Tape

Model # 781

781 is a 2.7mil, silicone splicing tape, primarily used for high shear, high temperature applications. Polyester backing with pure silicone adhesive for adhesion to silicone-coated materials.

Single-Coated Splicing Tape

Model # 784

784 is a 3mil, silicone splicing tape on polyester backing with release liner, primarily used for silicone coated materials. It is primarily used for splicing silicone release coated materials.

BOPP Self-adhesive Tape

Model # 818

818 is a 1.69mil, utility grade hot melt BOPP self-adhesive tape, primarily used for light to medium packages.

BOPP Self-adhesive Tape

Model # 830

830 is a 3.1mil, premium grade BOPP self-adhesive tape, primarily used for heavy weight packages.

Weather Resistant Tedlar® Tape

Model # 838

838 is a Tedlar® PVF tape with an acrylic adhesive developed for many long term weather resistant and protecting applications. Tedlar® polyvinyl fluoride (PVF) products are a part of the Dupont fluoropolymer family, they offer a unique balance of aesthetics while offering the durability of a fluoropolymer.

Circuit Plating Tape

Model # 851

A 3.6 mil. green polyester film tape with a unique conformable adhesive for printed circuit board masking during electroplating. This low-stretch polyester film can be applied by machine or by hand. Tape must be firmly pressed down by equipment with rubber-covered rollers or a rubber-covered platen press. Hand rolling usually does not provide enough pressure. A vivid outline of the circuit leads usually indicates adequate pressure was used. Solvent clean up of the board is recommended to facilitate subsequent soldering. Be sure to follow the manufacturer’s precautions and directions for use when using solvents. To obtain best performance, use this product within 12 months from date of manufacture and store under normal conditions of 60°F to 80°F and 50% relative humidity in the original carton.

Filament Tape

Model # 880

An 8.0 mil. high performance transparent reinforced tape with continuous, polyester yarn filaments, which give the tape high tensile strength, high impact resistance and high cut resistance. The Scotchâ„¢ backing provides excellent abrasion, moisture and scuff resistance. The adhesive is an aggressive adhesive specifically formulated to provide balanced performance having both high adhesion and long-term holding power to fiberboard, metal, printed and painted surfaces.

Double Coated Polyester Film

Model # 888

888SSL is a 3.1 mil, double coated, polyester film engineered to secure the longitudinal lap of pipe covering jackets. It replaces liquid adhesives to complete the vapor barrier.

Pallet Tack Tape

Model # 101D

***DISCONTINUED BY COVALENCE*** 101D is a heavy-duty cloth tape, coated on both sides with a rubber-based adhesive, used on printing presses equipped with flash stations: provides for healthier, cleaner environment, eliminates lint, as well as spray adhesive, from becoming airborne.

Polyester Sealing Tape

Model # 1251

3M 1251 has a rubber resin adhesive with a polyester backing, primarily used for applications that require joining, sealing, repairing, holding, or reinforcing of difficult to hold materials.

Cylinder Mount Build Up Tape

Model # 1650

3M 1650 is a 50mil non-compressible vinyl carrier coated on one side with a pressure sensitive acrylic adhesive designed for building up print cylinder diameter. Allows the printer to use thinner printing plates without changing plate mounting tape thickness or press modifications.

Black Paint Masking Tape

Model # 2510

3Mâ„¢ Black Masking Tape 2510 is a general purpose masking tape for holding, bundling, sealing and general paint masking where a dark colored tape is required.

Textile Flatback Tape

Model # 2526

3M 2526 is a 9.8 mil, flatback for use in the textile industry where high adhesion strength and high holding are required. It can be used in many holding, tabbing and leasing of natural and synthetic fiber applications where a performance flatback tape is desired. It can also be used for various types of edging, splicing and holding.

Extreme Performance Powder Coat Masking

Model # 2695

3M 2695 is a 5.5 mil, premium high performance crepe paper masking tape designed to perform well in most powder coat paint situations, including the use of bake cycles. This easy to unwind and hand tearable masking tape, maintains all the features that are desirable of a typical crepe paper paint masking tape but is designed specifically for the extremes of the powder painter.

Vent Tape

Model # 3294

3294 is a 5 mil rayon which is a non-woven, synthetic backing with a strip-coated low tack pressure sensitive adhesive for use in various venting applications to allow the confinement and outgassing of foam insulation. The non-woven backing conforms for effective sealing. It allows high air/gas permeability to promote minimal foaming voids. It has good burst strength and the uncoated areas have higher permeability.

Label Protection Tape

Model # 3565

3565 is a 1.9mil label protection tape. It has a clear, strong, moisture-resistant film backing and a strong adhesive that holds well to many treated and finished surfaces. It is used for the attachment and preservation of identifying labels in shipping, storage, and manufacturing applications.

Medium Grade PVC Packaging Tape

Model # 4124

4124 is a 2.4 mil packaging tape based on a PVC film backing and a natural rubber adhesive. It is most suitable for hand dispensers and automatic sealing machines where it unwinds easily and quietly. 4124 is also suitable for printing on.

Single Coated Polyester Splicing Tape

Model # 4130

4130 is a 2.16 mil, acrylic coated PET used for splicing filmic materials and edge protection and reinforcement. Its acrylic adhesive system offers excellent shear resistance. The product is also resistant to aging and humidity. It is extremely easy to unwind due to its special release coating.

Lithographers' Tape

Model # 4156

4156 is a 2.4 mil, specialty lithographer’s tape designed for film masking. The tape is available in litho red. It is light and age resistant and is easily removed without splitting, tearing or leaving adhesive residue. 4156 is highly transparent to the human eye even without the use of a light table, parts already masked, therefore, remain visible thus enabling accurate positioning of the tape.

PVC Identification Tape

Model # 4163

4163 is a 5.9 mil, PVC tape used in general purpose shop and identification uses. tesa 4163 is a highly conformable, multi-purpose, plasticized polyvinyl chloride tape with a smooth unwind for ease of application. Abrasion and age resistance guarantee toughness on the job.

Colored Filmic Packaging Tape

Model # 4204

4204 is a 2.2 mil, single sided PVC tape. 4204 has a natural rubber adhesive and is resistant to acids, alkalis and slovents. It is used primarily for produce bundling and bag sealing.

Light Duty Tensilized Polypropylene Strapping Tape

Model # 4224

4224 is a 2.8 mil, tensilized polypropylene strapping tape with a natural rubber adhesion system. It was specially developed for the food and drug industries. It exhibits good tensile strength and low elongation at the same time. The product has a clean appearance, is highly cold-resistant and, therefore, ideal also for frozen food packaging.

Premium Masking Film with Anti Spotting

Model # 4392

4392 is a 0.6 mil, HDPE masking film developed for superior paint and filler jobs. The product prevents inconvenient spotting on the car body after oven – or IR drying without residual moisture. It allows easy application by one person. The print of the film and the easy measuring guide (every 20 inches) facilitate the utilization. The excellent electrostatic charge secures a better adherence of the film to surface. Outstanding paint and filler adherence enable brillant results.

Bi-Directional PP Filament

Model # 4579

4579 is a 6.1 mil, bi-directional filament tape, with high tensile strength and tear resistance. It is used for bundling & strapping of heavy goods and pipes.

Temperature Resistant Surface Coated Cloth Tape

Model # 4657

4657 is an 11.5 mil, plastic coated cloth used in vehicle high temperature paint masking, whenever high stress such as paint solvents, easy removal after high temperatures and conformability is needed. Not suitable for brush washing processes with dichlorodifluoromethane or Freon 12.

Single Coated Vinyl Foam Tape

Model # 4718

A 125.0 mil. vinyl foam tape featuring A-30 acrylic adhesive on a thick silicone liner used for many sealing applications. 4718 is a flexible black, medium-density closed-cell foam tape with a pressure-sensitive adhesive on one side. The adhesive is protected by a the liner which allows for die-cutting without having to laminate another liner to the foam. 4718 belongs to the 4700 sereis which is a durable and flexible closed-cell vinyls tape family. 4700 sereis helps seal out dust, light and moisutre when placed under 30% compression. This vinyl tape offers excellent aging characteristics and will remain flexible when exposed to elevated temperatures and UV light. 4718 adheres to a variety of substrates, including latex painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS and PVC (non-plasticized). The adhesion is typically satisfactory within 20 minutes and continues to build with additional time. The solvent/ fuel resistance test consists of visual obeservation of the bonded to steel panels and immersed totally in solvent/ fuel for 24 hours.

Single Coated Vinyl Foam Tape

Model # 4726

A 125.0 mil. vinyl foam tape featuring A-30 acrylic adhesive on a thick silicone liner used for many sealing applications. 4718 is a flexible black, medium-density closed-cell foam tape with a pressure-sensitive adhesive on one side. The adhesive is protected by a the liner which allows for die-cutting without having to laminate another liner to the foam. 4718 belongs to the 4700 sereis which is a durable and flexible closed-cell vinyls tape family. 4700 sereis helps seal out dust, light and moisutre when placed under 30% compression. This vinyl tape offers excellent aging characteristics and will remain flexible when exposed to elevated temperatures and UV light. 4718 adheres to a variety of substrates, including latex painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS and PVC (non-plasticized). The adhesion is typically satisfactory within 20 minutes and continues to build with additional time. The solvent/ fuel resistance test consists of visual obeservation of the bonded to steel panels and immersed totally in solvent/ fuel for 24 hours.

Preservation Sealing Tape

Model # 4811

A 9.5 mil. white, polyethylene backing with a unique rubber adhesive that provides excellent performance as an industrial preservation tape. Effective for many outdoor applications in hot and cold weather over two years with quick, clean removal. Can be applied from freezing to 120°F (49°C), and removed at 0°F (-18°C). May be easily dispensed from the H-128 Hand Dispenser.

Double Coated Polyester Tape

Model # 4928

4928 is a 5 mil, transparent, double coated polyester tape used to mount plastic parts in the electronics industry. The adhesive system is especially resistant to plasticizers and offers a secure bond even at elevated temperatures. 4928 is a very well balanced combination of holding power, bonding strength & temperature performance to cover a wide range of lamination substrates and to resist shear stresses.

3M VHB™ 45mil Firm Black Acrylic Foam

Model # 4949

4949 is a 45 mil, VHBâ„¢ double coated adhesive foam. In many cases they can replace rivets, spot welds, liquid adhesives or other permanent fasteners.

Double-Sided General Purpose Foam Tape

Model # 4957

4957 is a 43.3 mil double-sided tape consisting of a very conformable closed cell PE-foam backing and a modified acrylic adhesive. This product is suitable for outdoor use and available in black or white.

Safety Stripe Tape

Model # 5700

A 5.4 mil. tape consisting of vinyl backing and rubber adhesive used for safety markings such as identifing traffic areas and physical hazards. 5700 resists most common solvents, but care must be taken to avoid ketones, ester and chlorinated hydrocarbons, which may cause the backing to swell or degrade in the intended product application. Avoid using this tape on highly plastizied materials which may result in adhesive softening and subsequent adhesion failure of tape.

White Masking Paper

Model # 6537

6537 is a 2.2 mil, specialy treated, white, masking paper with very good penetration resistance, for urethane and basecoat/clearcoat paints. This is a 6 inch wide by 750 foot roll (152mm x 228 m) other sizes have different part numbers.

Cloth Gaffers Tape

Model # 6910

Highland 6910 is a 12.0 mil, cloth gaffers tape. It is primarily used in the entertainment industry where light reflection is a concern.

Pre-bond Masking Tape

Model # 7148

7148 is a 6.7 mil, compound backing of polyester and soft PVC used as pre-bond masking on car bodies (e-coat) with multiple drying cycles. This compound can undergo stove enameling several times. It is also used for masking of the bonding surface (filler or KTL) for direct windshield mounting in automotive engineering by robot or manual processing.

Polyester Film Tape

Model # 8418

A 2.2 mil. printable, self-wound white polyester film coated with #100 high temperature acrylic adhesive. Passes all requirements for Federal Specification MIL-T-9906C, Amendment 1 for non-corrosive, heat, cold and solvent resistant identification tape when used with 8417 Tape.

Polyester Tape

Model # 8421

A 2.5 mil polyester tape for the photographic industry for splicing most film for processing through the developing chemicals. Also excellent for most general wide web splicing. Excellent solvent and chemical resistance, especially those found in photographic processess. Hot caustics will weaken backing after prolonged immersion.

High Performance Combining Tape

Model # 8470

Scotch 8470 is a 3.2 mil, high performance transparent narrow width film tape designed to form multipacks from single packages, and can also be used in many general purpose sealing applications. State of the art precesses for film making, adhesive coating and pressure sensitive tape converting lead a very consistent and reliable product for today’s market. Store in a clean and dry place between the temperatures of 40°F to 80°F and 40-50% relative humidity.

Stretchable Polyethylene Tape

Model # 8884

Scotch 8884 is a 5.0 mil, stretchable polyethylene tape. It is primarily used for internal and external shipping purposes.

Polyester Film

Model # 9110

9110 is 2.5mil, polyester film tape used to perform in masking applications requiring high chemical resistance. Also excellent for splicing applications requiring silicone adhesive.

Polyester Masking Tape

Model # 9146

9146 is a 1.8 mil, polyester film with a thermoset adhesive system that protects printed circuit boards from oxidation/contamination & copper from foreign parts and chemical attacks. An excellent low tack adhesive that allows easy removal and leaves minimum of residue.

Polyester Splicing Film

Model # 9150

9150 is a 3.5 mil, polyester splicing tape designed for splicing applications requiring a high level of silicone adhesive. A tough, yellow, high grade tape that is resistant to fumes, chemicals, tears, slivers & leaves minimal residue.

Web & Film Splicing Tape

Model # 9152

9152 is a 2.5 mil, tough, blue, high-grade polyester splicing tape. It has excellent conformability & will not break or tear during application or removal.

PCB Plating Tape

Model # 9190

9190 is a 3 mil, polyester film designed to perform in all phases of masking for printed circuit boards. It also protects circuitry from splashes and chemical fumes. Blue industry plater’s tape protects boards in tin / lead stripping and gold finger plating.

Polyester PCB Masking Tape

Model # 9191

9191 is a 3 mil, polyester film engineered for use in printed circuit board production. This product is specifically designed for masking of printed circuit boards where high performance and cost are considerations. Designed for applications requiring no / low residue.

Web & Film Splicing Tape

Model # 9207

9207 is a 3.3 mil, polyester film designed to perform a variety of splicing applications where chemical resistance and heat degradation resistance are desired.

Web & Splicing Tape

Model # 9208

9208 is a 3.3 mil, polyester film tape designed to perform in a variety of splicing applications. It has excellent resistance to chemical and heat degradation. It has a state-of-the-art halogen free silicone system.

Web & Film Splicing Tape

Model # 9209

9209 is a 3.3 mil, polyester film designed to perform a variety of splicing applications where chemical resistance and heat degradation resistance are desired.

Web & Film Splicing Tape

Model # 9211

9211 is a 3.3 mil, polyester film designed to perform a variety of splicing applications where chemical resistance and heat degradation resistance are desired.

Polyester Film

Model # 9212

9212 is a 2 mil, polyester film designed to splice where chemical and heat resistance is needed.

Hot Air Leveling Tape

Model # C663

C663 is a 9.5 mil, polyester film with silicone adhesive. It is the ultimate masking material for gold finger/tab protection used in both Horizontal and Vertical Hot Air Leveling Equipment. C663 offers a specially-formulated, thick, silicone adhesive on a thick, high-temperature, laminated substrate which reduces damming at the solder/tape butt line and ensures proper adhesion through multiple Hot Air Leveling operations.

Copper Foil Tape

Model # C665

C665 is a 2.8 mil copper foil tape with 1.4 mils of electrically conductive copper foil and 1.4 mils of electrically conductive acrylic adhesive. It is primarily used for EMI protection and electrical connectors. C665 was designed for conductivity through the entire construction.

Gold Finger Masking Tape

Model # C690

C690 is a gold finger masking tape with 6.5 mils of paper and 2 mils of rubber adhesive. It is primarily used in gold finger protection masking.

Polyetherimide Film Tape

Model # D926

D926 is a 2.5 mil, polyetherimide film with silicone adhesive. It was constructed to fill the requirements of a high performance thermoplastic polyetherimide backing materials along with the high temperature resistance of the silicone adhesive for a broad range of electrical and electronics applications.

High Performance Acrylic Transfer Tape

Model # D980

D980 is a 3.5 mil high performance glass reinforced acrylic transfer tape. It is designed for permanent bonding of low energy substrates, including rubbers and plastics.

Fiberglass Tape

Model # G540

G540 is a 10 mil, thick electrical grade, fiberglass tape with clear silicone pressure sensitive adhesive on one side. It is constructed to fill the requirements of most high temperature industrial needs. The new number for this product is 2915-10.

Glass Cloth Tape

Model # G551

G551 is a 7 mil, electrical grade fiberglass with white thermosetting organic rubber pressure sensitive adhesive on one side. It is primarily used as a heat insulation barrier.

Glass Cloth Tape

Model # G561

G561 is a 7 mil, electrical grade, fiberglass cloth tape with silicone adhesive. It is constructed to fill the requirements of most high temperature industrial needs.

Fiberglass Tape

Model # G565

G565 is a 7 mil, thick electrical grade fiberglass tape. It is constructed to fill the requirements of most high temperature industrial needs.

Double Coated Polyimide Tape

Model # K100

K100 is a 4.5 mil, double coated polyimide tape with silicone adhesive. It was constructed to fill the requirements of a high performance Thermoplastic Polyimide backing materials along with the high temperature resistance of the silicone adhesive for a broad range of electronic assembly and electrical insulation applications.

Polyimide Tape

Model # K102

K102 is a 2.5 mil, polyimide tape with a clear, electrical grade, acrylic pressure sensitive adhesive on one side. It was constructed to fill the requirements of a high performance thermosplastic polyimide backing materials. K102 was designed to fill the need of non silicone adhesive gold finger connector wave solder protection.

Polyimide Tape

Model # K103

K103 is a 2.5 mil, polyimide material with a clear, electrical grade, acrylic pressure sensitive tape with adhesive on one side. It was constructed to fill the requirements of a high performance thermosplastic polyimide backing materials.

Polyimide Tape

Model # K250

K250 is a 1 mil polyimide film coated with a 1.7 mil high-temperature, pressure sensitive silicone adhesive. K250 is primarily used as an electrical insulator and in gold finger protection.

Thermally Conductive Kapton® Tape

Model # K275

K275 is a 5 mil, double coated, thermally conductive Kaptonâ„¢ film with acrylic adhesive on both sides. It is provided in roll form with a release liner on both sides for ease of application. K275 was designed to bond electrical components to heat sinks.

Gold Finger Masking

Model # M737

M737 is a 4.2 mil, polyester film with blue/green, silicone/rubber adhesive. It offers an economical method to hold insulate and/or protect materials. M737 is a printed circuit board masking tape used primarily as a protection device in the gold plating of connector tabs or fingers. The adhesive offers a chemical resistant barrier and complete protection from caustic stripping & scrubbing plating solutions in either manual or automatic gold plating lines.

Printed Circuit Board Solder Masking

Model # M803

M803 is a 3 mil, polyester film with silicone adhesive. It offers an economical method to hold insulate and/or protect materials. M803 offers high/low temperature resistance. It is a printed circuit board masking tape used primarily as a protection device in the solder mask over the bare copper process. The optimum construction provides full protection from plating solutions with reduced set up time.

3 Mil Polyester Film Tape

Model # M815

M815 is a 3 mil, general purpose polyester splicing tape with clear silicone adhesive. It is most often used in the graphic arts industry. M815 offers superior bonding to a variety of treated papers, films and foils.

3 Mil Polyester Film Tape

Model # M818

M818 is a 3 mil, general purpose polyester splicing tape with clear silicone adhesive. It is most often used in the graphic arts industry. M818 offers superior bonding to a variety of treated papers, films and foils.

3.5 Mil Polyester Film Tape

Model # M820

M820 is a 3.5 mil, quick stick, polyester splicing tape with dark blue, silicone adhesive. It is most often used in the graphic arts industry. M820 offers superior bonding to a wide variety of treated papers, films, and foils.

2.8 Mil Polyester Film Tape

Model # M823

M823 is a 2.8 mil, quick stick, polyester splicing tape with silicone adhesive on one side and a release coating on the opposite side. M823 is used most often in the graphic arts industry. It offers superior bonding to a wide variety of treated papers, films and foils.

4 Mil Polyester Film Tape

Model # M827

**This item is discontinued, it has been replaced by M717 or M803.** M827 is a 4 mil, general purpose, polyester splicing tape with silicone adhesive. It is most often used in the graphic arts industry. M827 offers superior bonding to a wide variety of treated papers, films and foils.

3.5 Mil Polyester Film Tape

Model # M830

M830 is a 3.5 mil, general purpose, polyester splicing tape with silicone adhesive. It is most often used in the graphic arts industry for photo film splicing applications.

High Temperature Splicing & Masking

Model # M832

M832 is a 2-Mil polyester film with silicone pressure-sensitive adhesive. It is designed as a quick-stick polyester splicing tape most often used in the graphic arts industry. M832 features include high-temperature resistant silicone adhesive coated onto polyester film for increased temperature, tear and cut-through resistance. The highly cross-linked pressure sensitive silicone adhesive system is anchored to the polyester film in a process that eliminates adhesive legging and transfer in application. The high tack adhesive system offers masking protection and is compatible with numerous surface materials.

Double Coated Closed Cell Polyvinyl Chloride

Model # V998

V998 is a 1/4″ thick, closed cell Polyvinyl Chloride with acrylic on both sides. It is excellent for glazing of joints with high movement such as marine glass. V998 is a good choice to seal out water, dust and light, even in joints with a high degree of movement. Due to its excellent resistance to weathering, oxidation and ultraviolet exposure, produces long-life seal. Norseal® V990 series.

PTFE Glass Fabric

Model # 132-3

132-3 is a 3 mil PTFE impregnated glass fabric. The PTFE provides a smooth, anti-stick surface, while the glass fabric provides strength and dimensional stability. The DeWal 132 Series are “non-adhesive” products used in covering food preparation tables, heat sealing bars and conveyor belts.

Professional Grade Cloth Duct Tape

Model # 257LA

257LA is a 13 mil professional grade cloth duct tape used for sealing and seaming metal and flexible ducts, mobile home bottom board tape and handling polyethylene sheeting in abatement work.

Polyimide Goldfinger Masking Tape

Model # 303-1

303-1 is a 1 mil, polyimide film and silicone adhesive designed for high temperature masking applications. In electrical insulation applications this product does meet class H requirements. The primary uses for this product are gold finger masking, coil insulation and high temperature harness wrapping.

High Temperature Aluminum Foil/Glass Cloth Tape

Model # 363LC

363L is a 7.3 mil, high temperature aluminum foil/glass cloth tape. It is primarily used as a heat reflective wrap, over insulation cables, instruments, or other high temperature sensitive materials.

UHMW Polyethylene Tape

Model # 423-5

423-5 is a 7 mil, Ultra High Molecular Weight (UHMW) polyethylene film with an aggressive permanent acrylic adhesive. The UHMW film provides an excellent low friction, non-stick surface in many ways like PTFE. The film is very tough and abrasion resistant. This tape has two primary applications automotive and mechanical. Mechanical applications include chute liners, wear pads & guide rails.

Double Coated Film Tape

Model # 476XL

3M476XL double coated film tape is a pressure-sensitive adhesive system that offers excellent quick stick for sealing many boxes and tubes used for various types of shipments. The adhesive width is decreased by 1/8″ on each side to facilitate easy liner startability.

Glass Fiber Reinforced Transfer Tape

Model # 50014

50014 is a glass fiber grid reinforced transfer tape. It features a high performance rubber hot melt adhesive. 50014 meets the most demanding of permanent bond applications involving rubber/EPDM profiles.

High Strength Filament Tape

Model # 53311

53311 is a 6.9 mil, polyester backed, fiberglass reinforced, filament tape. It has an aggressive and high shear resistant adhesive system. The durable backing has high tensile strength and low elongation.

Aluminum Foil Tape

Model # 53900

53900 is a 4 mil, foil tape that combines a dead soft aluminum backing with an aggressive rubber adhesive, enabling flexibilty and adhesive strength to conform to the most irregular contours.

Economy Grade Duct Tape

Model # 59214

59214 is an 8 mil thick polycoated cloth tape with an aggressive rubber adhesive which provides high initial tack and great adhesion to a variety of surfaces. It features a high grade cloth offering good tensile properties while retaining excellent tearability for easy application. It is excellent for packaging, bundling, holding, seaming, sealing, protecting, wrapping and repairing.

Plasticized PVC Tape

Model # 60761

60761 is a 5 mil, tough plasticized polyvinyl chloride tape coated with an aggressive adhesive, offering clean removal. It also offers good unwind without stretching. It is used as a floor marking tape such as those separating areas in factories, warehouses, subdivision of playing fields in gyms and marking off parking spaces, aisles/corridors at fairs and in hospitals.

VICTREX® PEEK™ Film

Model # 815-2

815-2 is a 4 mil, extruded, virgin PEEK (polyethereketone) film has been surface modified on one side and coated with a silicone adhesive system. The silicone adhesive is resistant to harsh chemical environments while retaining good peel strength with clean removal. The PEEK film offers an excellent combination of friction and wear properties with high heat resistance and good electrical insulation. Typical applications for the this tape include sliding bearing, abrasion resistant wire wraps and oil field equipment requiring abrasion resistance and electrical insulation.

Polyimide Tape

Model # K102R

K102R is a 2.5 mil, polyimide tape with a clear, electrical grade, acrylic pressure sensitive adhesive on one side. It was constructed to fill the requirements of a high performance thermosplastic polyimide backing materials. K102R was designed to fill the need of non silicone adhesive gold finger connector wave solder protection.

Polyimide Tape

Model # K250X

K250X is a 2.5 mil, thick, polyimide backing material with a high temperature, silicone pressure sensitive tape. It was constructed to fill the requirements of a high performance thermosplastic polyimide backing materials. K250X is chosen for gold finger protection during wave solder applications.

100# BOPP Medium Grade Filament Tape

Model # RG400

RG400 is a 5.3mil biaxially oriented polypropylene tape coated on one side with a synthetic rubber resin adhesive. This economic fiberglass reinforced tape is designed for applications requiring outstanding holding power.

2.5 mil Polyimide & Silicone Adhesive Tape

Model # 2345-1

2345-1 is a 2.5 mil, polyimide film coated with a high-temperature, pressure sensitive silicone adhesive. It is primarily used in electrical insulation and gold finger protection.

Polyimide Tape

Model # 2345-2

2345-2 is a 3.5 mil, polyimide film coated with a high-temperature, pressure sensitive silicone adhesive. It is primarily used in electrical insulation and gold finger protection.

FEP PTFE Tape

Model # 2355-2

2355-2 is a 3.5 mil, FEP PTFE film coated with a high-temperature, pressure sensitive silicone adhesive. It is used as primary insulation in motor coils, transformers and other electrical components. 2355-2 is an excellent choice for use as a cable wrap. The product is clear, making color codes beneath the wrap visible.

PTFE Coated Glass Cloth Tape

Model # 2915-6

2915-6 is an 8 mil, fiberglass fabric impregnated with a PTFE dispersion and coated with a high temperature, pressure sensitive, silicone adhesive. It is frequently used by the packaging industry as a release surface on heat sealers, blister formation and form-fill-seal equipment.

Premium Dead-Soft Foil with Butyl Adhesive

Model # 360-45

360-45 is a 45mil, aluminum foil, heavy duty, all weather duct tape. It has an aggressive butyl rubber adhesive system. It is primarily used for instant water tight bonds around duct work or as trailer repair.

Plasm Spray Masking Tape

Model # 500-10

500-10 is a 16 mil, silicone rubber / glass cloth with a silicone adhesive. It is a single ply plasma masking tape constructed of an extra thick backing and coated with an aggressive high temperature resistant adhesive. The extra thick single ply construction offers superior flexibility over the traditional “double ply”. This product is a one step plasma masking tape and will provide superior protection during grit blast and plasma metalization operations.

Industrial Tape

Model # 626-35

626-35 is a 35mil, aluminum foil backed, butyl adhesive tape, primarily used for sealing metal and wood surfaces.

Window Flashing Tape

Model # 627-20

627-20 is a 20mil, polyethylene, low density tape, primarily used under tile on the ridge and hip lines of roofs to prevent moisture from entering the building.

FEP Film Tape

Model # C-TAPE

C-tape is a 3 mil, FEP PTFE film with a pressure sensitive silicone adhesive. It offers high electrical strength in volts per mil. C-tape is often used for coil and transformer insulation. Due to its transparency, C-tape is useful for “see thru” identification on wire harnesses.

Clean Removable Polyester Film

Model # HPH 82

HPH-82 is a 2 mil, polyester film coated with silicone adhesive that will release cleanly. These tapes are used in masking metal parts during bonding or mild acid etching, as electrical insulation, as splicing tape for silicone liners and paper and in the epoxy bonding of aircraft parts

Double Coated Polyethylene Foam

Model # IM2920

IM2920 is a 36 mil, or 1/32inch white, closed cell polyethylene foam coated on both sides with a high performance, modified acrylic adhesive. It provides the excellent temperature properties, holding power and chemical resistance exhibited by acrylic adhesives plus the strength of a cross-linked polyethylene foam. The 1/32″ foam carrier offers a gap-filling function that aids in the joining of uneven or irregular surfaces.

Vinyl Tape

Model # 471 RED

A 5.2 mil. vinyl plastic film tape with a rubber adhesive used for many color coding, abrasion protection, decoration, sealing, patching, splicing, wrapping and general purpose applications and also is excellent for many lane marking applications. The pigmented backing maintains vivid colors, even when exposed to heavy abrasion. Conformability and dead stretch properties of this tape are ideal for taping, wrapping or sealing many curved or irregular surfaces. While 471 tape resists many common solvents, tape should not be exposed to ketones, chlorinated hydrocarbons and esters found in lacquer thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. 471 is available in transparent and nine other colors. However, the properties of the colored tapes do change.

All Service Jacket (ASJ) Tape

Model # 728 ASJ

728 ASJ is an all service jacket (ASJ) facing coated one side with a blue acrylic adhesive protected by a paper release liner. The specially formulated blue adhesive is designed for extreme cold weather applications. Meets UL ® 273 classification.

Scotchlite™ Conspicuity Marking Roll

Model # 75-0300

Scotchliteâ„¢ Conspicuity Sheeting is a highly retroreflective prismatic sheeting designed to mark the sides and rear of vehicles for enhanced visibility and detection.

Silicone Splicing Tape

Model # 784SW10

***DISCONTINUED BY COVALENCE*** 784SW10 is a 2.9mil, self-wound release coated silicone splicing tape, based on 1mil polyester backing, primarily used for silicone coated materials.

Korel Micro-Cellular Polyurethane Foam

Model # K20.500

K20.500 is a 500 mil, PU foam ideal for a variety of gasketing and energy absorption needs. Korel K20 foams are very soft and highly conformable, with a very low force to deflect. Korel K20 is recommended for closure of irregular surfaces or flexible materials.

Korel® Polyurethane Foam

Model # K30.500

K30.500M is a 500 mil, polyurethane foam used in cellular phones and electrical enclosures. The Korel K30 series are soft, conformable, low deflection, urethane foams offering excellent compression set resistance and low out-gassing that exceeds fogging requirements. K30 is ideal for open/close applications.

UHA Adhesive Transfer

Model # UHA1185

****DISCONTINUED USE UHA1182*** Designed for applications requiring excellent high temperature performance. The adhesive offers excellent resistance to solvents such as gasoline, motor oil and anti-freeze. provides excellent resistance to UV light exposure.

Vinyl Tape

Model # 471 BLUE

A 5.2 mil. vinyl plastic film tape with a rubber adhesive used for many color coding, abrasion protection, decoration, sealing, patching, splicing, wrapping and general purpose applications and also is excellent for many lane marking applications. Pigmented backing maintains vivid colors, even when exposed to heavy abrasion. Conformability and dead stretch properties of this tape are ideal for taping, wrapping or sealing many curved or irregular surfaces. While 471 tape resists many common solvents, tape should not be exposed to ketones, chlorinated hydrocarbons and esters found in lacquer thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. 471 is available in transparent and nine other colors. However, the properties of the colored tapes do change.

5.2mil SPVC Tape

Model # PVC 4700

PVC 4700 is a 5.2mil matte surface soft PVC coated in a synthetic rubber adhesive. This superior quality product has a long shelf life and write-on capabilities. It provides a very effective vapor and moisture barrier. This tape is highly conformable and resistant to aging, sun, water, fungus, bacteria, oil, acids, alkalies, and corrosive chemicals while providing good abrasion, imact, and rupture resistance. PVC 4700 is used for color coding, lane marking, and safety coding to meet OSHA requirements. It is also used in decorating, striping on vehicles, boats, sporting equipment, and more. It is a good masking for hard chrome plating and anodizing, and can also be used as a pipe wrap and duct joint sealer.

6 mil soft colored PVC

Model # PVC 4725

PVC 4725 is a 6 mil soft PVC tape with a synthetic rubber adhesive. It is used for color coding; lane marking and safety coding to meet OSHA requirements; decorating, striping on vehicles, boats, sporting equipment, etc.; masking for hard chrome plating & anodizing; harness and pipe wrapping; duct and joint sealing. PVC 4725 is of superior quality, with a long shelf-life, and “write-on” capability. It provides a very effective vapor and moisture barrier. It is highly conformable and resistant to aging, sun, water, fungus, bacteria, oil, acids, alkalis and corrosive chemicals. It provides good abrasion, impact and rupture resistance. Alternative to 3M #471. Moisture absorption Less than 1.5% ,Moisture vapor Less than 2.5% (gm/100 sq in/24 hrs, Metal corrosion None to copper, brass, steel, aluminum,Accelerated aging factor Greater than 100%(% of original adhesion to backing after aging) Government specifications Conforms to PPP-T-66E, Type 1,Class 2; MIL-T-4239z (black only); A-A-1689A

6 mil SPVC Tape

Model # PVC 4750

PVC 4750 is a 6 mil soft PVC tape with a synthetic rubber adhesive. It is used for color coding; lane marking and safety coding to meet OSHA requirements; decorating, striping on vehicles, boats, sporting equipment, etc.; masking for hard chrome plating & anodizing; harness and pipe wrapping; duct and joint sealing.

SPVC Vinyl Die-Cut Arrow

Model # PVC 4775

PVC 4775 is an SPVC vinyl die-cut arrow on a roll used for aisle marking, color coding, inventory identification, defect markings, and numerous other applications. The arrows are made of durable vinyl construction. The arrows are waterproof and can withstand heavy traffic.

SPVC Vinyl Die-Cut Dots

Model # PVC 4790

PVC 4790 is a Pressure sensative SPVC Vinyl Die-Cut Dot. The heavy duty vinyl construction is waterproof and will withstand heavy traffic. PVC 4790 is used for aisle marking, color coding, inventory identification, defect markings, and numerous other applications. 1″ and under come 1,000 to a roll, about 1″ is 500 dots to a roll.

10mil Heavy Duty SPVC Pipe Wrap Tape

Model # PVC 4800

PVC 4800 is a 10 mil heavy-duty SPVC pipe wrape/surface protection film tape coated with a rubber adhesive. It is flame retardant and highly resistant to sun, water, oil, acids, alkalies, and corrosive chemicals. This tape is bacteria and fungus resistant. PVC 4800 protects pipe joints, conduit couplings for overhead or direct buried applications.

10mil Heavy-Duty SPVC Pipe Wrap Tape

Model # PVC 4810

PVC 4810 is a 10 mil heavy-duty SPVC pipe wrape/surface protection film tape coated with a rubber adhesive. It is flame retardant and highly resistant to sun, water, oil, acids, alkalies, and corrosive chemicals. This tape is bacteria and fungus resistant. PVC 4810 protects pipe joints, conduit couplings for overhead or direct buried applications.

10mil Heavy-Duty SPVC Pipe Wrap Tape

Model # PVC 4820

PVC 4820 is a 10 mil heavy-duty SPVC pipe wrape/surface protection film tape coated with a rubber adhesive. It is flame retardant and highly resistant to sun, water, oil, acids, alkalies, and corrosive chemicals. This tape is bacteria and fungus resistant. PVC 4820 protects pipe joints, conduit couplings for overhead or direct buried applications.

20 mil Heavy-Duty SPVC Vinyl Tape

Model # PVC 4830

PVC 4830 is a 20 mil heavy-duty SPVC pipe wrape/surface protection film tape coated with a rubber adhesive. It is flame retardant and highly resistant to sun, water, oil, acids, alkalies, and corrosive chemicals. This tape is bacteria and fungus resistant. PVC 4830 protects pipe joints, conduit couplings for overhead or direct buried applications.

Vinyl Tape

Model # 471 BLACK

A 5.2 mil. vinyl plastic film tape with a rubber adhesive used for many color coding, abrasion protection, decoration, sealing, patching, splicing, wrapping and general purpose applications and also is excellent for many lane marking applications. Pigmented backing maintains vivid colors, even when exposed to heavy abrasion. Conformability and dead stretch properties of this tape are ideal for taping, wrapping or sealing many curved or irregular surfaces. While 471 tape resists many common solvents, tape should not be exposed to ketones, chlorinated hydrocarbons and esters found in lacquer thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. 471 is available in transparent and nine other colors. However, the properties of the colored tapes do change.

Vinyl Tape

Model # 471 BROWN

A 5.2 mil. vinyl plastic film tape with a rubber adhesive used for many color coding, abrasion protection,decoration, sealing, patching, splicing, wrapping and general purpose applications and also is excellent for many lane marking applications. Pigmented backing maintains vivid colors, even when exposed to heavy abrasion. Conformability and dead stretch properties of this tape are ideal for taping, wrapping or sealing many curved or irregular surfaces. While 471 tape resists many common solvents, tape should not be exposed to ketones, chlorinated hydrocarbons and esters found in lacquer thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. 471 is available in transparent and nine other colors. However, the properties of the colored tapes do change.

Vinyl Tape

Model # 471 GREEN

A 5.2 mil. vinyl plastic film tape with a rubber adhesive used for many color coding, abrasion protection, decoration, sealing, patching, splicing, wrapping and general purpose applications and also is excellent for many lane marking applications. Pigmented backing maintains vivid colors, even when exposed to heavy abrasion. Conformability and dead stretch properties of this tape are ideal for taping, wrapping or sealing many curved or irregular surfaces. While 471 tape resists many common solvents, tape should not be exposed to ketones, chlorinated hydrocarbons and esters found in lacquer thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. 471 is available in transparent and nine other colors. However, the properties of the colored tapes do change.

Vinyl Tape

Model # 471 WHITE

A 5.2 mil. vinyl plastic film tape with a rubber adhesive used for many color coding, abrasion protection, decoration, sealing, patching, splicing, wrapping and general purpose applications and also is excellent for many lane marking applications. Pigmented backing maintains vivid colors, even when exposed to heavy abrasion. Conformability and dead stretch properties of this tape are ideal for taping, wrapping or sealing many curved or irregular surfaces. While 471 tape resists many common solvents, tape should not be exposed to ketones, chlorinated hydrocarbons and esters found in lacquer thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. 471 is available in transparent and nine other colors. However, the properties of the colored tapes do change.

Pipe Thread Seal Tape

Model # PTFE 5410

This pipe thread seal tape is 100% Virgin PTFE, white film in a labeled plastic spool/box. This seal tape lubricates joints, making them easy to assemble for a leak proof seal.

Vinyl Tape

Model # 471 ORANGE

A 5.2 mil. vinyl plastic film tape with a rubber adhesive used for many color coding, abrasion protection, decoration, sealing, patching, splicing, wrapping and general purpose applications and also is excellent for many lane marking applications. Pigmented backing maintains vivid colors, even when exposed to heavy abrasion. Conformability and dead stretch properties of this tape are ideal for taping, wrapping or sealing many curved or irregular surfaces. While 471 tape resists many common solvents, tape should not be exposed to ketones, chlorinated hydrcarbons and esters found in lacquer thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. 471 is available in transparent and nine other colors. However, the properties of the colored tapes do change.

Invisible Mending Tape

Model # OFFICE 4510

OFFICE 4510 is a 2.0mil (0.05mm) specially treated matte finish polypropylene film with a solvent-based acrylic adhesive system. Its Write-on, non-glare surface makes it perfect for bar code applications, and is suitable for electronic scanning. It can also be used for prescription/label protection and overlamination.

5.5 Mil Low Density Polyethylene Film tape

Model # PEFILM 4520

PEFILM 4520 is a 5.5mil low density polyethylene film tape with an acrylic adhesive. This tape is highly conformable and features good abrasion and chemical resistance. The acrylic based adhesive systam provides high adhesion and cohesion which yields a permanent bond with virtually no edge bleed out. PEFILM 4520 is UV resistant and offers an outstanding moisture barrier. It will not crack or crease at low temperatures and has excellent long term aging stability without yellowing. PEFILM 4520 is used for water filter purification pipe wrap, protective sealing, splicing, seaming and patching where a highly conformable and optically clear material is required.

4.5mil Low Density Polyethylene Film Tape

Model # PEFILM 4540

PEFILM 4540 is a 4.5 mil low density polyethylene film coated with a synthetic rubber adhesive. Its tough polyethylene backing offers good abrasion and tear resistance. The low tack adhesive is suitable for surface protection applications, and it is excellent for low temperature bonding. PEFILM 4540 is ideal for wire identification, surface protection, seaming, and splicing of films.

4.5Mil Low Density Polyethylene Film Tape

Model # PEFILM 4560

PEFILM 4560 is a 4.5mil low density polyethylene film tape coated on one side with a synthetic rubber adhesive. The backing has been stabilized with additives to resist the effects of UV exposure. This tape leaves no residue on removal and maintains a water tight seal in all weather conditions. Its adhesive system remains permanently tacky and bonds well to most surfaces over a wide range of temperatures. PEFILM 4560 is designed for masking windows and doors in stucco applications. It is also ideal for polyethylene splicing or seaming in construction applications.

36 Mesh Industrial Grade Duct Tape

Model # DUCTCLO 3700

DUCTCLO 3700 is a 10.2mil, 36mesh, high quality general purpose polyethylene-coated cloth with a natural rubber based adhesive. This tape will conform well to irregular surfaces, and will not twist or curl during application. It offers excellent water and abrasion resistance and is hand-tearable. DUCTCLO 3700 is used as a quality waterproof packaging tape for export shipments, for splicing, vinyl repair, protecting, and bundling. It is also used for ductwork sealing and seaming and for general use color coding.

6.8Mil Aluminum F/S/K Tape

Model # DUCTFOIL 4092

DUCTFOIL 4092 is a 6.8 Mil aluminum foil tape featuring a dead soft aluminum foil/3-way fiberglass scrim/paper carrier coated with an aggressive synthetic rubber resin adhesive carried on a 3.2 mil removable paper release liner. This tape’s malleable foil conforms well to irregular and curved surfaces to maximize adhesive contact and provide quick, positive grab to the insulation surface. DUCTFOIL 4092 is used as a closure system for fiberglass and mineral wool insulation systems that are faced with foil, to seal seams and joints on aluminum faced fiberglass duct board, and to provide a vapor barrier that assures the integrity of the system.

6 Mil PVC Striped Safety Warning Tape

Model # PVCSAFET 4840

PVCSAFET 4840 is a 6 mil (0.15mm) conformable soft PVC vinyl coated in a synthetic rubber adhesive. This tape is self-extinguishing and will not corrode copper, brass, steel, or aluminum. PVCSAFET 4840 is used for striping and warning,and the marking of hazardous areas and exits to comply with OSHA requirements.

7 Mil PVC Electrical Insulating Tape

Model # ELE&WH 4100

ELE&WH 4100 is a 7 mil (0.178mm) PVC electrical insulation tape with a natural rubber adhesive. ELE&WH 4100 is used for wire and cable insulation, bundling, and primary splice insulation at no more than 600V. It is non-flame retardant.

8 Mil All-Weather Electrical Tape

Model # ELE&WH 4140

ELE&WH 4140 is a 8 Mil (0.20 mm) PVC premium grade electrical insulation tape with a rubber-based adhesive. It offers all-weather performance.

7 Mil PVC Electrical Insulation Tape

Model # ELE&WH 4190

ELE&WH 4190 is a 7 mil (0.178mm) PVC electrical insulation tape with a natural rubber adhesive. ELE&WH 4190 is used for wire and cable insulation, bundling, and primary splice insulation at no more than 600V. It is non-flame retardant.