Masking & Surface Protection

Vinyl Electrical Tape

Model # 33

3M 33 electrical tape is a quality, general purpose vinyl insulating tape. It has excellent resistance to: abrasion, moisture, alkalies, acid, copper corrosion and varying weather conditions (including sunlight). It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is flame-retardant and conformable and provides excellent mechanical protection with minimum bulk. It is a UL Listed “Insulating Tape”.

Polyester Film Tape Adhesive

Model # 54

A 2.5 mil. tape featuring a polyester film backing with a rubber thermosetting adhesive used for wrapping fine wires where magnet wire is used for color coding. Like all 3M insulating tapes, 54 tape is available in standard and custom widths and lengths.

Tartan™ 200 Masking Tape

Model # 200

3M masking tape 200 is a 4.5 mil, natural colored crepe paper used as a utility purpose paper tape for non-critical masking, holding, bundling and sealing. It is a class III, bronze masking tape.

High-Temperature Masking Tape

Model # 213

3M masking tape 213 is a 6.1 mil, smooth, crepe paper treated with a high heat and solvent resistant saturant with a firm rubber adhesive formulated for maximum transfer resistance and high holding power. It is a high-temperature resistant tape for use in masking and holding applications where temperatures reach 350°F up to one hour. 213 has a firm and transfer-resistant adhesive and does not anchor itself as softer adhesives often do. It is ideal for use on aluminum anodized surfaces. 213 should not be subjected to outdoor exposure or prolonged periods of sunlight. It may become very difficult to remove.

Sulfur Free High-Temperature Masking Tape

Model # 214

3M masking tape 214 is a 6.7 mil, smooth crepe paper treated with a high heat and stain resistant saturant with a firm rubber adhesive designed to give outstanding holding power for a high heat resistant tape. It is a high-temperature paper masking tape good for one hour at 350°F on most surfaces. The adhesive is sulfur-free which makes it one of the few tapes that can be used on copper, silver and other precious metals. 214 should not be subjected to outdoor exposure or prolonged periods of sunlight.

Scotch® Fine Line Tape

Model # 215

3M masking tape 215 is a 4.7mil copolymer plastic film, which is ideal for painting applications where temperature performance of 250°F, conformability and a sharp, clean paint separation line are needed; such as automotive fascias, window and door pillars. A very conformable film backed tape with a low profile to achieve an excellent paint line on highly contoured surfaces.

Weather resistant masking tape

Model # 225

3M masking tape 225 is a 6.7mil weather resistant, silver colored, smooth crepe, paper masking for outdoor exposure up to one month. The aggressive adhesive can be used for holding or protecting, particularly when outdoor weathering is encountered for a short period of time. The silver colored coating on the backing reflects ultraviolet radiation to provide resistance to weathering.

High Performance Paint Masking Tape

Model # 231

3M masking tape 231 is a 6.1mil high performance, smooth mini-crepe paper masking, designed to perform well in most industrial painting situations, including bake cycles. This superior masking tape is designed specifically for the professional painter. It is perfectly balanced to give outstanding masking results. Can be used at bake temperatures up to 250°F for one hour and removes from most surfaces without adhesive transfer. 3M 231 masking tape is recommended for all critical color separation paint masking operations. It has best-in-class holding power for critical paint lines and clean removal on high valued products or processes.

Scotch® Medium Temperature Masking Tape

Model # 232

3M masking tape 232 is a 5.7 mil high performance, smooth crepe paper masking, designed to be used in medium temperature paint bake operations. It has been laboratory tested on painted panels and found to remove cleanly at bake temperatures of up to 250°F.

Medium Temperature Paint Masking Tape

Model # 234

3M 234 masking tape is a 5.9 mil general purpose crepe paper tape. It is used for holding, bundling, sealing, and medium temperature paint bake operations. A smooth crepe paper treated with a heat and solvent resistant saturant. 234 is designed for non-critical paint masking, and it is classified as a 3M class II Silver paint masking.

Photographic Tape

Model # 235

3M235 is a black colored opaque crepe paper tape primarily used in the photographic industry.

Colored Paper Tape

Model # 256

3M256 is a colored flatstock tape for masking, bundling, holding and splicing operations needing colors for identification.

Box Sealing Tape

Model # 311

3M 311 is a 2.05 mil, biaxially oriented polypropylene (BOPP)film with pressure sensitive acrylic adhesive. It requires no moisture, heat or solvent for activation. 311 is a general purpose box sealing tape designed specifically for utility type applications on light to medium weight boxes. It works well over a broad range of temperatures, specifically in colder and damper applications.

Gap Enclosure Tape

Model # 314

314 is a 2.1 mil, BOPP (biaxially oriented polypropylene) film with pressure sensitive acrylic adhesive. Its application is most easily accomplished at room temperature. However, it may be applied to fiberboard boxes at temperatures down to 40°F. It is a box sealing tape with gapped flap regular slotted containers (RSC’s). There is adhesive along the two edges with uncoated film in the middle. 314 is designed to meet the box sealing needs only for loads which are palletized and unitized throughout their entire distribution cycle.

Polyester Tape (Pink)

Model # 335

3M335 is a polyester tape with a very low tack adhesive system for use as a protective tape.

Double Coated Film Tape

Model # 415

A 4.0 mil. double coated tape featuring A-40 acrylic adhesive with a polyester backing used for bonding similar and dissimilar materials, such as metals, glass, wood, papers, paints and plastics. A-40 is a pressure-sensitive, medium firm acrylic adhesive system. It features an excellent balance of good initial adhesion (quick-stick) and good shear holding power. 415 tape is also available in a razor slit configuration which provides a non-tear feature.

Aluminum Foil Tape

Model # 488

488 is a 2 mil, alloy aluminum foil backing used with fiberglass duct-board to provide a dependable vapor barrier to the insulating system. It conforms to irregular surfaces such as FSK facings & blends with the basic facing pattern to provide a vapor barrier that assures integrity of the insulation system.

High Temperature Adhesive Transfer Tape

Model # 502

502FL is a 2.0 mil. transfer tape that uses the 100 adhesive designed for temperature exposure to 450°F (232°C) for short periods of time and/ or solvent resistant. Bond strength increases as a function of time and temperature. 502FL will have lower initial tack than the other 3M 100 adhesive transfer tapes to some substrates.

Kraft Paper Masking Tape

Model # 513

513 is a 5.5 mil, conformable I flexible, semi-bleached crepe paper, coated with natural synthetic rubber pressure-sensitive adhesive. #515 is designed primarily for general purpose bundling, protecting, and various industrial applications.

Polypropylene Carton Sealing Tape

Model # 520

520 is a 2.8mil, premium grade polypropylene carton sealing tape, manufactured with “natural rubber” pressure sensitive adhesive, for closure of corrugated and liner-board boxes. Available in hand roll, machine length and ‘log’ rolls.

General Purpose Grade Masking Tape

Model # 633

633 is a 4.7mil, general purpose masking tape, primariily used for the building and painting industry as well as the do-it-yourself market.

Cloth Insulating Tape

Model # 721

IT721 is a 9 mil, general purpose, utility grade, cotton cloth used in applications requiring good mechanical strength.

Transparent & Colored Polyester Film Tapes

Model # 850

A 1.9 mil. polyester film tape that can generally be used for splicing and applications where chemical resistance and/ or clean removal is necessary. Tape is not recommended to exceed 12 months of storage under normal storage conditions at 70°F and 50% relative humidity. Prolonged exposure to sunlight or hot caustics will cause backing to become brittle and lose tensile strength. 850 transparent tape is qualified to meet federal spec.

Polyester Tape

Model # 853

A 2.2 mil. polyester tape used for many applications where solvent resistance and/ or high shear properties are desired. 853 is not recommended to exceed 12 months from date of manufacture when stored under normal conditions at 70°F and 50% relative humidity. Tape is quailified to meet federal spec. Printable on the adhesive side and by the “Print Seal” method on the backing side.

Filament Tape

Model # 890

An 8.0 mil. high performance black packaging tape reinforced with continuous glass yarn filaments, which give the tape very high tensile strength. The black Scotchparâ„¢ backing provides outdoor weathering, abrasion, moisture, and scuff resistance. The adhesive is an aggressive packaging adhesive specifically formulated to provide balanced performance, having both high adhesion and long term holding power.

Sealer Tape

Model # PB1

PB1 is a 5.7 mil, all purpose, water-resistant, medium crepe, pressure-sensitive tape designed for specialty applications. Especially suited for bookbinding, packaging, identification, sealing and protection. Automotive applications include holding wiring to metal frames. Meets various GM, Ford, and Chrysler specifications. Black color imparts some resistance to ultra violet (UV) light.

Fluorescent Flatback Tape

Model # PF5

PF5 is a 6.1 mil, medium strength flatback, packaging and identification tape. Prints, perforates and die cuts with extreme ease. Ideal for shelf marking and temporary safety marking. Printable with standard flexographic inks.

All Purpose Masking Tape

Model # PG5

PG5 is a 6.3 mil, smooth crepe, pressure-sensitive masking tape. PG5 offers an excellent balance of quick stick, panel adhesion and holding properties. Recommended for most paint masking applications where excellent cornering with clean removal is desired. Will support masking paper aprons at 160′ F (70°C) for 30 minutes. Not recommended for outdoor exposure.

Flatback Paper Masking Tape

Model # PS3

PS3 is a 7.9 mil, kraft flatback for carton sealing. It is a high performance, water resistant, pressure sensitive tape featuring easy release from roll, good quick-stick, with excellent bond to carton and good edge tear. Performs well as a low temperature splicing tape. Product is not repulpable.

High Tack Tape

Model # 1254

3M 1254 has a rubber resin adhesive with a polyester backing, primarily used for applications that require joining, sealing, repairing, holding, or reinforcing of difficult to hold materials such as flexible polyethylene cleanroom partitions, The rubber resin adhesive provides aggressive adhesion to many “difficult to stick to” surfaces, yet still provides short term clean removability from many of these surfaces. In addition, the polyester backing provides high strength combined with good abrasion, chemical and thermal resistance.

Cleanroom High Temperature Tape

Model # 1258

3M 1258 is a cleanroom high temperature, polyimide ESD tape that is the perfect choice for masking applications for printed circuit boards during wave solder or solder dip processes. It also works well as a release surface in fabrication of parts cured at elevated temperatures. Tape 1258 employs a proprietary technology that results in extremely low electrostatic discharge at unwind and removal from the PWB. Conventional polyimide tapes can typically generate over 10,000 volts during use, which can damage board mounted components. With tape 1258, circuit board degradation due to electrostatic discharge is virtually eliminated, without any of the typical drawbacks of conventional “anti-static” or “static-free” tapes (e.g. – variable adhesion and opaqueness). In addition, the polyimide backing provides good dimensional stability at high temperatures and is flame retardant & chemical resistant.

Printed Circuit Board Masking

Model # 1279

3M 1279 is a 3.8 mil polyester film backing with a specially blended silicone adhesive primarily used for masking printed wiring boards during the gold tip plating process. 1279 tape has a low stretch polyester film for machines, as well as hand applications. Tape must be firmly pressed down by equipment with rubber-covered rollers. Hand rolling usually does not provide enough pressure. A vivid outline of the circuit leads usually indicates adequate pressure has been used. Solvent clean up of the board is recommended to facilitate subsequent soldering. Be sure to follow the manufacturer’s precautions and directions for use when using solvents.

Printed Circuit Board Electroplating Masking

Model # 1280

3M 1280 is a 3.6 mil polyester film tape with a unique adhesive for printed circuit board masking during electroplating. 1280 tape has low stretch polyester film for machine, as well as hand application. Tape must be firmly pressed down by equipment with rubber-covered rollers. Hand rolling usually does not provide enough pressure. A vivid outline of the circuit leads usually indicates that adequate pressure was used. Solvent clean up of the bond is recommended to facilitate subsequent soldering. Be sure to follow the manufacturer’s precautions and directions for use when using solvents. To obtain best performance, use this product within 12 months from date of manufacture and store under normal conditions of 60°F to 80°F and 50% relative humidity in the original carton.

Printed Circuit Board Electroplating Mask

Model # 1281

3M1281 is a 2.6 mil polyester film tape with a special adhesive for printed circuitry masking during electroplating of solder mask over bare copper (SMOBC) printed boards. This low stretch polyester film can be applied by machine, as well as by hand. The tape must be firmly pressed down by equipment with rubber covered rollers or a rubber covered platen press. Hand rolling usually does not provide adequate pressure. A vivid outline of the circuit leads indicates adequate pressure was used. Solvent clean up of the board is recommended to facilitate subsequent soldering. When using solvents, be sure to follow the manufacturer’s precautions and directions for use when handling such materials. To obtain best performance, use this product within 12 months from date of manufacture and store under normal conditions of 60°F to 80°F and 40 % to 50% relative humidity in the original carton.

Printed Circuit Board Masking Tape

Model # 1285

3M1285 is a transparent blue polyester film tape with a rubber adhesive which resists plating and etching bath chemicals. Roller pressure must be monitored to ensure clean, residue-free boards after tape removal. Air pressure controlled equipment can be set at 30 – 40 PSI. Non-air pressure controlled rollers should be set no closer than 1/2 the PC board thickness. Heat should not be used during tape lamination. The low stretch polyester film of 1285 tape is designed for machine and hand application. To obtain best performance, use this product within 12 months from date of manufacture and store under normal conditions of 60°F to 80°F and 50% relative humidity in the original carton.

Polyethylene Tape (Clear)

Model # 2104

3M2104 is a polyethylene tape with a very low-tack adhesive system to help protect many polished metals, plastic and glass materials.

Paper Tape

Model # 2214

3M masking tape 2214 is a 5.3mil general purpose paper tape for holding, bundling, sealing, non-critical masking and a vast number of other jobs where a pressure sensitive tape is needed.

General Purpose Masking Tape

Model # 2307

3M masking tape 2307 is a 5.6mil general purpose masking tape for holding, bundling, sealing, general paint masking and a vast number of other applications where a pressure sensitive tape is needed. 2307 is a Class III (Bronze) masking tape with clean removal used for light duty bundling, attaching, and labeling.

High Temperature Painter's Masking Tape

Model # 2317

3M masking tape 2317 is a 6.2mil smooth crepe paper treated with a heat and solvent resistant saturant. A high temperature, high holding power tape suitable for most all Auto OEM paint masking applications.

Solvent Resistant Masking Tape

Model # 2328

2328 is a general paper masking tape used in all paint applications. Its thickness and conformability provide sharp paint edge. It is solvent resistant and can be exposed to 160°F for 1 hour as a paint striping masking tape. The paint mask should not be left more that 1 or 2 days to avoid adhesive transfer.

Performance Masking Tape

Model # 2364

3M masking tape 2364 is a 6.5mil crepe paper tape for general masking applications in the industrial market, where good holding power and temperature performance is required. It has a natural/synthetic rubber adhesive blend. 2364 has been laboratory tested on painted steel panels and found to remove cleanly at bake temperatures up to 300°F for thirty minutes. The actual temperature and time performance may be higher or lower for a given application. Clean removal can vary depending on surface type, processing conditions, type of paint involved, as well as the temperature of the surface at removal. It has reliable masking and clean removal on surfaces for functional coatings or paints. 2364, a Class II (Silver) masking product is also used for splicing & heavy duty maintenance.

High Temperature Paint Masking Tape

Model # 2693

3M masking tape 2693 is a 8.5 mil, mini-crepe paper masking tape suitable for most paint masking applications. A smooth, heavy duty tape designed for automotive, truck and bus applications where very aggressive holding is required at room temperature and high temperatures. It has excellent performance with high solid paints and urethane clear coaters used in the transportation industry. The holding power of this tape resists the most stringent applications and bake cycles. It can be removed warm or cold from most surfaces with no adhesive transfer. 2693 masking tape is recommended for all critical color separation paint masking operations. It has best-in-class holding power for critical paint lines and clean removal on high valued products or processes.

Co-Extruded Multi-Polymer Tape

Model # 2A04

3M 2A04 is a 2.0 mil co-extruded tape featuring multi-polymer backing and a low-tack acrylic adhesive system used for protection of many surfaces. 2A04 tape is engineered to provide a unique combination of physical properties for a variety of surface protection applications. Avoid prolonged exposure to direct UV sunlight which may affect the performance of the tape.

Co-Extruded Multi-Polymer Tape

Model # 2A05

3M 2A05 is a 2.0 mil co-extruded tape consisting of a multi-polymer film backing and a low-tack acrylic adhesive system primarily used for protection of many surfaces. 2A05 tape is engineered to provide a unique combination of physical properties for a variety of surface protection applications. Avoid prolonged exposure to direct UV sunlight which may affect the performance of the tape. Resins used in the construction of the film backing are proprietary.

Co-Extruded Multi-Polymer Tape

Model # 2A10

3M 2A10 is a 2.0 mil co-extruded tape consisting of a multi-polymer film backing and a low-tack acrylic adhesive system primarily used for protection of many surfaces. 2A10 tape is engineered to provide a unique combination of physical properties for a variety of surface protection applications. Avoid prolonged exposure to direct UV sunlight which may affect the performance of the tape. Resins used in the construction of the film backing are proprietary.

Co-Extruded Multi-Polymer Tape

Model # 2A12

3M 2A12 is a 2.0 mil co-extruded tape with a multi-polymer backing and a low-tack acrylic adhesive system primarily used for protection of many surfaces. 2A12 tape is engineered to provide a unique combination of physical properties for a variety of surface protection applications. Avoid prolonged exposure to direct UV sunlight, which may affect performance of tape. Resins used in the construction of the film backing are properietary.

Co-Extruded Multi-Polymer Tape

Model # 2A25

3M 2A25 is a 2.0 mil co-extruded tape consisting of a multi-polymer film backing with a medium-tack adhesive system primarily used for protection of many surfaces. 2A25 tape is engineered to provide a unique combination of physical properties for a variety of surface protection applications. Avoid prolonged exposure to direct UV sunlight which may affect the performance of the tape. Resins used in the construction of the film backing are proprietary.

Co-Extruded Multi-Polymer Tape

Model # 2A26

3M 2A26 is a 2.0 mil co-extruded tape consisting of a multi-polymer backing with a medium-tack acrylic adhesive system primarily used for protection of many surfaces. 2A26 tape is engineered to provide a unique combination of physical properties for a variety of surface protection applications. Avoid prolonged exposure to direct UV sunlight which may affect the performance of the tape. Resins used in the construction of the film backing are proprietary.

Co-Extruded Multi-Polymer Tape

Model # 2A29

3M 2A29 is a 2.0 mil co-extruded, multi-polymer tape with a medium-tack acrylic adhesive system primarily used for protection of many surfaces. 2A29 tape is designed to provide a unique combination of physical properties for a variety of surface protection applications. Avoid prolonged exposure to direct UV sunlight which may affect the performance of the tape. Resins used in the construction of the film backing are proprietary.

Co-Extruded Multi-Polymer Tape

Model # 2A87

3M 2A87 is a 2.0 mil co-extruded, protective tape consisting of a multi-polymer backing with a high-tack adhesive system. 2A87 tape is designed to provide a unique combination of physical properties for a variety of surface protection applications. Avoid prolonged exposure to direct UV sunlight and water, which may result in adhesive transfer. Resins used in the construction of the film backing are proprietary.

Co-Extruded Multi-Polymer Tape

Model # 2A88

3M 2A88 is a 2.0 mil co-extruded tape consisting of a multi-polymer film backing with a low-tack acrylic adhesive system primarily used for decoration and prefabrication applications. 2A88 tape is engineered to provide a unique combination of physical properties for a variety of surface protection applications. Avoid prolonged exposure to direct UV sunlight and direct exposure to water, which may affect the performance of the tape. Resins used in the construction of the film backing are proprietary.

Co-Extruded Protective Tape (Clear)

Model # 2E79

3M 2E79 is a 2.0 mil co-extruded tape featuring a multi-polymer backing with a very high-tack acrylic adhesive system used for proctection of many substrates. Resins used in the construction of the film backing are proprietary. 2E93 tape can help protect automotive carpet from being soild during assembly and shipment, including most stain resistant protected carpets. Avoid prolonged exposure to direct UV sunlight which may affect the performance of the tape.

Co-Extruded Multi-Polymer Tape (Clear)

Model # 2E93

3M 2E93 is a 2.5 mil co-extruded tape featuring a multi-polymer backing with a high-tack acrylic adhesive system used for proctection of many substrates. Resins used in the construction of the film backing are proprietary. 2E93 tape can help protect automotive carpet from being soild during assembly and shipment, including most stain resistant protected carpets. Avoid prolonged exposure to direct UV sunlight and moisture, which may affect the performance of the tape.

3 mil Polyethylene Surface Protection

Model # 3110

3M 3110 is a 3.0 mil polyethylene tape with low tack adhesive system for protection of many polished metals, plastics and glass materials. Minimum adhesion build up and clean removal. Tape should be applied and removed at a temperature not less than 60°F. Not designed for prolonged exposure to direct sunlight for extended periods. Prolonged exposure to heat, moisture and UV light may effect performance of tape and may result in adhesion build up, high unwinde and adhesive residue problems.

Clear Polyethylene Surface Protection Tape

Model # 3112

3M 3112 is a 3.0 mil low-density, polyethylene backed tape with a low-tack adhesive system used for protection of polished metals, plastics and painted materials with a gloss finish. 3112 leaves behind minimal adhesion build up. This product is not designed for prolonged exposure to direct sunlight for an extended period of time, which may affect the performance of the tape.

3 mil Polyethylene Surface Protection

Model # 3125

3125 is a 3.0 mil polyethylene tape with low tack adhesive system to help protect mill finished stainless and aluminum coils or sheets. Minimum adhesion buildup and clean removal. Tape should be applied and removed at a temperature not less than 60°F. Not designed for prolonged exposure to direct sunlight for extended periods which may effect the performance of the tape.

Solar Cell Securing Tape

Model # 4129

4129 is a 2 mil transparent polyester film with acrylic adhesive. This product is tear resistant and resistant to UV, water and various chemicals.

Floor Marking Tape

Model # 4169

4169 is a 8 mil, polyvinyl chloride tape used a floor marking tape. Tough plasticized PVC tape coated with an aggressive adhesive & with a release coat. Offers good unwind without stretching and clean removal. Flame retardant.

4 mil Polyethylene Surface Protection

Model # 4187

A 4.0 mil. polyethylene tape with a high tack adhesive system which offers enhanced surface protection for a variety of materials that have textured surfaces. Also protects decorative high pressure laminates, altered marble and brushed metals. Tape should be applied and removed at a temperature not less than 60°F. Avoid prolonged exposure to direct sunlight and water for extended periods which may effect the performance of the tape and cause adhesive residue.

Vinyl/Plastic Insulating Tape

Model # 4208

4208 is highly conformable, multi-purpose electrician’s tape which is used for insulating, splicing, connections & bare wires, repair work and for general industrial use. It offers high dielectric strength and insulation resistance. 4208 is individually packaged in a cellophane over wrapping.

High Temperature/Strength Fine Line Masking Tape

Model # 4244

4244 is a 5.4 mil, flexible fine line masking tape for painted or unpainted plastic parts (e.g. bumpers) and for multi-color painting of all kinds. 4244 conforms to dimensional changes during oven drying with temperatures up to 320°F, without lifting. 4244 is water resistant and removes warm or cold. Higher tensile strength and heavier backing make it excellent for long straight runs and thick paint layers.

Medium Duty Tensilized Polypropylene

Model # 4288

4288 is a 4.06 mil, stable, medium duty tensilized polypropylene strapping tape with a natural rubber adhesive system. It exhibits good tensile strength with low elongation at the same time. The product is heat and cold resistant. Due to the black backing it is extremely resistant to UV light and therefore recommended for outdoor use.

Appliance Grade TPP Tape

Model # 4299

4299 is a 5.9 mil, tensilized polypropylene specially designed with a high tensile strength and is stain resistant. It features extra high tack, extra high adhesion and high chemical resistance. It is water-proof and non-toxic and is used for closing, holding and securing.

High Temperature Masking Tape

Model # 4304

4304 is a 7.1 mil, high temperature, paper masking tape. It is primarily used for high temperature paint masking in the automotive, marine, aerospace and industrial markets. Due to its tightly cured rubber adhesive, 4304 stays in place during painting applications. A flexible crepe backing enables it to expand and contract with various substrates before, during and after the heat cycle. This feature provides residue free removal and clean paint edges.

Temperature Resistant Masking Tape

Model # 4305

4305 is a 6.7 mil, temperature resistant, paper masking tape designed for the transportation industry. It is a finely creped, extremely stretchable and strong paper masking tape for spray painting with subsequent oven drying up to a temperature of 250°F. The excellent quick stick adhesion allows for an easy and safe application even with heavy paper masking coverings. tesa 4305 is resistant to wet sanding and provides excellent anchorage of fillers or paints (water or solvent based) to the reverse side of the tape, preventing any kind of flaking. After the oven drying process with temperatures up to 250°F, 4305 can be removed easily without tearing and leaving any residue.

Crepe Paper Masking

Model # 4308

tesa 4308 is a fine creped, 6.7mil, premium class masking tape. It was specially developed for the high standards of painting in the transportation industry. The crepe tape gives high bonding security on rubber, glass and plastic profiles and is suitable for all paint spraying systems. It sticks well to curves due to the high flexibility of its backing and is temperature-resistant up to 265°F.

Flatback Carton Sealing Tape

Model # 4313

4313 is a 4.3 mil, paper flatback tape used primarily for sealing and identifying of light to medium weight cartons. Elongation reserve is twice as high as conventional paper and can withstand short term shocks. High holding power and good tensile strength create durable seals. 4313 is easy to unwind and suitable for use with hand dispensers or packaging machines.

Medium Grade Masking Tape

Model # 4315

4315 is a 6 mil, medium grade masking tape that provides an excellent blend of value and performance thanks to its excellent paper strength and cured rubber adhesive. It performs under stress and temperatures where general purpose products fail. 4315 is a production grade masking tape which has been formulated to assure easy and clean removal from a variety of substrates. It also has excellent wet grab and should be used when general purpose masking tapes do not perform adequately.

Flat Creped paper Tape

Model # 4328

4328 is a 6.3 mil, flat back creped paper tape used for sealing bags with flag type closure.

High Temperature Resistant Masking Tape

Model # 4330

4330 is a 7.5 mil, crepe masking tape used to mask circuit boards before plating and cable bundling. 4330 is a finely creped, flexible, wet resistant and temperature resistant masking tape with a high tensile strength. It guarantees a sharp edged finish and can be removed very easily without leaving any residues.

Non Woven PET Powder Coat Masking

Model # 4331

4331 is a 4.3 mil, non-woven PET used for masking multi finish painting and powder coating up to 390°F such as steel furniture, electrical system parts, office equipment, aircraft parts & hospital equipment.

Long-term Indoor Paint Masking

Model # 4334

4334 is a 3.1 mil, strong creped paper backing coated with an acrylic adhesive. This tape is suited for almost all indoor paint works. It is suitable for a variety of common surfaces such as glass, aluminum, hard-PVC and wood. It is especially suited for indoor applications when a precise razor sharp paint edge is needed. tesa 4334 precision mask is even applicable with water based paints and lacquers and even high class spatula techniques. The combination of the highly equipped backing material and the outstanding special adhesive formulation allows easy removability up to 5 months after application. This enables multiple working processes in only one covering process.

Easy Cover Car

Model # 4378

tesa® 4378 Easy Cover Car is a 6.7 mil convenient “3 in 1” solution for the masking of large areas for car body repair. The convenient system includes: 1. Masking tape tesa® 4309 2. Masking paper border 3. HDPE masking film The main advantage is the combination of the advantages of the single components. a) tesa® 4309 is a finely creped, extremely stretchable and flexible paper masking tape. It is suitable for water and solvent based paints and can be used for paint spraying with subsequent oven/ or IR-drying up to a temperature of 120 °C. b) The additional paper edge provides perfect paint absorption on the most critical area close to the repair. c) The HDPE film serves for the protection against spray particles. It is specifically treated for better paint adherence. Due to the high static the film clings to the car body. Easy Cover Auto allows a single person to cover large areas easily and quickly. For storing, transporting and disposing off tesa® Easy Cover Auto is very space saving.

High-Temp Polypropylene Overmask Film

Model # 4379

4379 is a 2 mil, polypropylene film specially designed for overspray protection in combination with tesa paper and fineline masking tapes. Its specially modified film surface provides good adhesion to overspray, which enfures flakefree demasking. The mattre finish of the translucent film eliminates reflections and at the same time allows visual control for easy positioning and quality control. 4379 shows excellent resistance against paint solvents, power washing and multiple drying cycles.

High Density Polyethylene Tape

Model # 4394

4394 is a 0.35 mil, high density polyethylene film developed for superior paint and filler jobs. It allows easy application by one person and has excellent electrostatic charge which secures better to surfaces. These outstanding paint and filler adherence enable brillant results.

UV Paper Grade Masking

Model # 4407

4407, a 0.15mm UV paper grade consists a very strong and flexible paper backing coated with a modified UV resistant acrylic adhesive. This tape is suitable for almost all paint applications during construction or renovating ships and boats. It is suitable for a variety of common surfaces such as glass, aluminum, wood and especially hard-PVC. It is especially suited for outdoor applications when a clear and sharp paint edge is needed. tesa 4407 UV Paper grade is applicable with many kinds of paints and its conformability allows masking of slight curves as well as masking in straight lines. The combination of the conformable backing material and the special adhesive formulation allows easy residue free removability up to 8 weeks after outdoor application. this enables multiple working processes in only one covering process.

Multi-purpose Cloth Tape

Model # 4651

4651 is a 11.5 mil, durable cloth tape designed to conform around flexographic print plates, commonly known as the “Edgemaster”. Its plastic coated surface is weather-proof and tear resistant, yet comformable and easy to work with. A super-strong adhesive guarantees sticking to the most demanding surfaces.

Standard Polyethylene Extruded Cloth Tape

Model # 4688

tesa 4688 is a standard grade polyethylene extruded cloth tape. It is based on a 55 mesh woven PET/rayon fabric backing coated with a pressure sensitive natural rubber adhesive. tesa 4688 is a typical repairing tape convenient for a variety of needs with very good handling characteristics. Applications: marking, masking, packaging, protecting, fastening, closing …and a lot more!

Vinyl Electroplating Tape

Model # 4731

A 7.0 mil. pigmented vinyl backing with a rubber adhesive primarily used for electroplating, paint masking and other general purpose applications. The backing of 4731 offers excellent abrasion, moisture, alkali, and acid resistance. While 4731 resists most common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons and esters found in lacquer thinners, degreasers, paint strippers, etc. which may cause the backing to swell or curl.

High Temperature Fine Line Tape

Model # 4735

4735 is an 5.5 mil, high temperature vinyl fine line paint masking tape for fascia, rocker panels, two-tone and other multiple color applications where critical paint break lines are required.

Polyethylene Surface Protection Film

Model # 4848

4848 is a 1.97 mil Polyethylene surface protection film for glass, marble, painting, plastering and decoration work. It consists of an environmentally friendly polyethylene backing, which is completely coated with a self adhesive UV and age resistant acrylic mass. This ensures an easy and residue free removal up to four weeks. It is resistant against different chemical ingredients, physical stress and moisture. The red or clear transparent backing avoids a “dark room” effect when the film is applied to windows. It can be used indoors and outdoors especially for long term and large area protection.

Silicone Rubber Coated Rayon Fabric Tape

Model # 4863

4863 is a 25 mil, dimpled, siliconized treated rayon cloth tape. It consists of a specially treated rayon fabric and a thermosetting rubber adhesive. The silicone rubber coated surface is resistant to “sticky” substances, yet provides a reliable “non-slip” effect on smooth surfaces. 4863 has a dimpled surface to maximize its resistance to the clogging action of “sticky” substances and inks.

Water Soluble Wave Solder Tape

Model # 5414

5414 is a 2.1mil, poly-vinyl alcohol backed adhesive, primarily used to mask gold fingers on printed circuit boards during wave soldering.

3M VHB® 32mil Dark Gray Conformable

Model # 5930

5930 is a 32 mil very high bond (VHBâ„¢ ) acrylic foam tape with double coated pressure sensitive adhesive. It is used for bonding a wide variety of substrates, including lower surface energy materials, such as powder coated paints and plastics. The foam is conformable to increase contact with surfaces.

Production Grade Carton Sealing

Model # 6100

6100 is a 1.6 mil, general purpose, biaxially oriented polypropylene carton sealing tape, manufactured with “hot melt”, pressure sensitive adhesive, offering secure holding power to a variety of corrugated and liner-board boxes. Complies with the Federal Food, Drug and Cosmetic Act, CFR Title 21, Subpart B, Par. 175.105, which covers the use of pressure-sensitive adhesives and tapes for ‘indirect contact’ food packaging, such as box sealing. Available in both machine and hand length rolls.

Reverse Wound PV9 Adhesive Transfer Tape

Model # 7002

The adhesive has good high tack and shear resistance. It is UV, aging and solvent resistant. Excellent short term high temperature resistance. Acid Neutral. It is used for decoration and display manufacturing, picture framing, photograph mounting & sample swatch assembly.

Straight Line Masking Tape

Model # 7133

7133 is a strong yet thin polypropylene backed fine line tape. It is especially suited for long, straight line applications. It will not deform even under extreme stress, enabling the straightest edge possible on a variety of surfaces. Its special adhesive allows for repositioning if first mask-off is not satisfactory. Solvent and water resistant, 7133 stands up to wet sanding. It can be removed warm or cold without residue, saving clean up time and expense.

Polyurethane Protective Tape

Model # 8562

8.0 mil indoor grade polyurethane protective tape with acrylic adhesive. Tough thermoplastic polyurethane elastomer designed for indoor industrial applications. Abrasion, erosion, scratch, puncture, and impact resistant. Conformable to most surfaces. Provides excellent surface protection using a technology that contains no VOC’s and is fast and easy to apply.

Composite Bonding Tape

Model # 8901

A 2.3 mil high temperature tape with a silicone adhesive for use in solar panel production, composite bagging operations, or to help remove flashing after bonding. Designed to provide clean removal during masking operations involving high temperatures and pressure.

Powder Coat Masking Tape

Model # 8902

3M8902 is a high temperature tape with a silicone adhesive for use as a maskant in powder coat painting. Also used in many composite bagging operations or to remove flashing after bonding.

General Purpose Polyester/Silicone Tape

Model # 8951

8951 is a 2.8mil, polyester tape, primarily used to break flash in composite bonding as well as splicing silicone and non-silicone coated paper and films. Silicone adhesive allows for high temperature applications.

Web & Film Splicing Tape

Model # 9111

9111 is a 3 mil, polyester film for splicing webs of various siliconized release papers & film. A specially formulated, high tack silicone adhesive provides quick stick.

Modified Silicone Fume Protection Tape

Model # 9144

9144 is a 2.25 mil, polyester film designed to perform in most masking applications in the productions of printed circuit boards. Protects against splashes and fumes from the chemicals used in tin/lead stripping and gold finger plating operations.

Non-Silicone Fume Protection Tape

Model # 9145

9145 is a 1.8 mil, polyester film which protects the printed circuit board and copper from foreign parts and chemical attacks.

Polyester Film Electrical Insulating Tape

Model # 9148

9148 is a 2.5 mil, polyester film tape designed to perform in masking applications requiring high chemical resistance. Also excellent for splicing applications requiring a high performance silicone adhesive. It resists fumes and chemicals for low / no residue applications. It will not break or tear during application or removal.

Polyester Film

Model # 9153

9153 is a 2.25 mil, tough, high-grade polyester splicing tape. It resists fumes and chemicals for low / no residue applications.

Powder Coating Masking

Model # 9154

9154 is a 4 mil, polyester film designed to perform in powder coating applications.

PCB Plating Tape

Model # 9185

9185 is a 4 mil, polyester film designed to mask printed circuit boards. It protects circuitry from splashes and chemical fumes and is engineered for applications requiring no / low residue. This is a green stop-off tape which protects boards in tin / lead stripping and gold finger plating.

Web & Film Splicing Tape

Model # 9210

9210 is a 3.3 mil, polyester film designed to perform a variety of splicing applications where chemical resistance and heat degradation resistance are desired.

Web & Film Splicing Tape

Model # 9215

9215 is a 3.5 mil, polyester film specifically formulated to withstand fixing chemicals used by photo processors. It has a state-of-the-art rubber adhesive system that is resistant to both chemicals and heat degradation. It is designed to splice photo film to itself or to leaders. 9215 gold provides confidence at an economical price.

Web & Film Splicing Tape

Model # 9251

9251 is a 3.3 mil, polyester film designed to perform a variety of splicing applications where chemical resistance and heat degradation resistance are desired.

Autoclave & Composite Bonding Mask

Model # 9261

9261 is a 4 mil, strong, polyimide film designed to meet the temperature and pressure conditions of autoclave and composite bonding applications. It has a high temperature resistant, proprietary blended, rubber adhesive.

Polyimide Tape

Model # 9321

***9321 has been replaced by IT7170 by American Biltrite.*** 9321 is a 2.5 mil, polyimide film tape used to protect goldfingers during wave soldering. It resists temperature of molten solder and allows for easy removal without danger of breakage or bath contamination.

Polyimide PCB Masking Tape

Model # 9322

9322 is a 3.5 mil, poyimide tape engineered to protect gold fingers during the wave solder process. It resists the high temperatures of molten solder while allowing easy removal without danger of breakage or bath contamination.

Medium Grade, Contractor Grade Duct Tape

Model # AC36

AC36 is a 10 mil polyethylene coated cloth tape with an aggressive rubber adhesive. It is designed as an economical, general-purpose duct tape. It meets HUD, BOCA and L.A. County codes. Tested in accordance with UL-723.

Copper Foil Tape

Model # C667

C667 is a 2.8 mil, rolled and annealed, copper foil tape with electrically conductive, acrylic adhesive on one side. It was designed to provide shielding and electrical contact.

Resin Impregnated Paper Tape

Model # C680

C680 is a 6 mil resin impregnated paper tape with a high temperature silicone blend adhesive on one side. It is primarily used in solder protection applications. C680 is a cost effective alternative for solder protection of printed circuit board connector fingers.

Polyester/Rope-Fiber Laminate

Model # LA26

LA26 is a 6.0 mil polyester film/rope-fiber flatback tape. It is designed for use in high temperature conditions up to 350°F.

Composite Bonding Flash Masking

Model # M782

M782 is a 3.5 mil, polyester film with pink, rubber resin adhesive. It offers an economical method to hold, insulate and/or protect materials. The rubber adhesive is specially formulated to use as a flash mask protection tape in metal or composite bonding.

Thin Printed Circuit Board Masking

Model # M788

M788 is a 1.5 mil, polyester film with a rubber adhesive. It was created as a low cost substitute for dry film in multilayer processing to protect copper. M788 is specially designed for thin core boards and flexible circuitry. Recommended replacement for M716.

6.5 Mil Polyester Film Tape

Model # M867

M867 is a 6.5 mil, polyester film with transparent rubber resin adhesion. The polyester film offers an economical method to provide a high dielectric spacer material.

Powder Coated Paint Masking

Model # M887

M-887 is a high performance powder coating masking tape manufactured from 2.0 mil polyester film with 1.5 mils of pressure sensitive silicone adhesive.

Medium Temp Masking Tape

Model # PG12

PG12 is a 6.5mil masking tape that consists of a coarse crepe paper backing coated on one side with a rubber resin adhesive. It is designed for use in open molding, cast polymer, solid surface, and multiple industrial paint applications.

Weatherable Masking Tape

Model # PG20

PG20 is a weatherable masking tape utilizing an aluminum, black, saturate crepe paper backing to protect from the effects of ultraviolet light. The product can be used in outdoor applications for periods up to 30 days.

High Temperature Masking Tape

Model # PG21

PG21 is a high temperature masking tape designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325°F (163°C) for 30 minutes. This product is not recommended for outdoor use. PG21 performs well in wet strip applications. It’s easy handling, smooth crepe backing exhibits high strength, excellent conformability to irregular surfaces and exceptional cornering. Provides resistance to paint flaking and a clean, well defined paint line.

Performance Grade Masking Tape

Model # PG22

PG22 is a 7.0 mil high performance masking tape that features a fine-structured crepe paper backing and rubber/resin adhesive. It is resistant to high solvent polyurethane based paints. This product also offers a transfer free removal from prepared aluminum surfaces.

Premium Grade Low-Tack Masking

Model # PG29

PG29 is a smooth paper backed low tack, 6.8mil pressure sensitive masking tape. It is great for use on delicate surfaces such as wallboard and laminates. It can also be used for wet strip automotive paint masking. PG29 removes without damaging most surfaces.

All Purpose Masking Tape

Model # PG56

PG56 is a 6.4 mil, superior grade, general industrial pressure-sensitive masking tape having medium temperature capabilities. PG-56 can withstand exposure to forced drying conditions up to 225°F (107°C) for 30 minutes with warm to hot removal recommended. Excellent quick stick and holding properties. Designed for applications requiring transfer resistance in conjunction with a variety of paints and surfaces. Special release coat provides a ‘extra measure’ of moisture and solvent resistance. Not recommended for outdoor exposure.

14 Day UV Resistant Specialty Masking

Model # PT14

PT14 is a 5.5mil specialty paper masking tape consisting of a fine crepe paper backing coated on one side with a synthetic rubber adhesive. It was designed for use in hull, exterior, deck, and cabin applications requiring UV resistance.

Autowrap

Model # . 410

410 Autowrap is a 4.1 mil, white UV stabilized polyolefin film masking. 410 is designed to protect automotive finishes and trim during assembly and transit.

2.5 mil Co-Extruded Polyethylene Protective Tape

Model # 25A10

3M 25A10 is a 2.5 mil co-extruded protective tape featuring a polyethylene backing with a low-tack acrylic adhesive that offers enhanced abrasion resistance. 25A10 tape offers excellent abrasion resistance to help protect many polished steels, aluminum sheets, coils, gloss finish plastic laminate tops, gloss finish painted metals and glass from surface damage, such as scratching and abrading. The enhanced elongation properties of the film allow the tape to be left on during many forming operations, where damage may occur. Avoid prolonged exposure to direct UV sunlight exposure, which may affect the performance of the tapes. The abrasion resistance testing was conducted using ASTM testing method D4060 and a taber abrader empolying a CS-10 wheel and 100 grams of auxiliary weights.

2.5 mil Co-Extruded Polyethylene Protective Tape

Model # 25A12

3M 25A12 is a 2.5 mil co-extruded protective tape featuring a polyethylene backing with a low-tack acrylic adhesive that offers enhanced abrasion resistance. 25A12 tape offers excellent abrasion resistance to help protect many polished steels, aluminum sheets, coils, gloss finish plastic laminate tops, gloss finish painted metals and glass from surface damage, such as scratching and abrading. The enhanced elongation properties of the film allow the tape to be left on during many forming operations, where damage may occur. Avoid prolonged exposure to direct UV sunlight exposure, which may affect the performance of the tapes. The abrasion resistance testing was conducted using ASTM testing method D4060 and a taber abrader empolying a CS-10 wheel and 1000 grams of auxiliary weights.

Co-Extruded Polyethylene Protective Tape

Model # 25A25

3M 25A25 is a 2.5 mil co-extruded protective tape featuring polyethylene backing with an acrylic adhesive that offers enhanced abrasion resistance for the protection of metals, plastics and glass. 25A25 tape offers excellent abrasion resistance to help protect aluminum, stainless sheets, coils and painted metals from surface damage, such as scratching, abrading, etc.. The enhanced elongation properties of the film allow the tape to be left on during many forming operations where damage may occur. Avoid prolonged exposure to direct UV sunlight which may affect the performance of the tape. The abrasion resistance testing was conducted using ASTM test method D4060 and a taber abrader employing a CS-10 wheel and 1000 grams of auxiliary weights.

2.5 mil Co-Extruded Polyethylene Protective Tape

Model # 25A26

3M 25A26 is a 2.5 mil co-extruded protective tape featuring polyethylene backing with an acrylic adhesive that offers enhanced abrasion resistance for the protection of metals, plastics and glass. 25A26 tape offers excellent abrasion resistance to help protect aluminum, stainless sheets, coils and painted metals from surface damage, such as scratching, abrading, etc.. The enhanced elongation properties of the film allow the tape to be left on during many forming operations where damage may occur. Avoid prolonged exposure to direct UV sunlight which may affect the performance of the tape. The abrasion resistance testing was conducted using ASTM test method D4060 and a taber abrader employing a CS-10 wheel and 1000 grams of auxiliary weights.

2.5 mil Co-Extruded Polyethylene Protective Tape

Model # 25A29

3M 25A29 is a 2.5 mil co-extruded protective tape featuring polyethylene backing with an acrylic adhesive that offers enhanced abrasion resistance for the protection of metals, plastics and glass. 25A29 tape offers excellent abrasion resistance to help protect aluminum, stainless sheets, coils and painted metals from surface damage, such as scratching, abrading, etc.. The enhanced elongation properties of the film allow the tape to be left on during many forming operations where damage may occur. Avoid prolonged exposure to direct UV sunlight which may affect the performance of the tape. The abrasion resistance testing was conducted using ASTM test method D4060 and a taber abrader employing a CS-10 wheel and 1000 grams of auxiliary weights.

2.5 mil Co-Extruded Polyethylene Protective Tape

Model # 25A87

3M 25A87 is a 2.5 mil co-extruded protective tape featuring polyethylene backing and an acrylic adhesive which offers enhanced abrasion resistance for the protection of many metals and plastics. 25A87 tape offers excellent abrasion resistance to help protect many matte finished plastic laminate tops, cultured marble, many textured plastics and metals from surface damage, such as scratching and abrading, etc.. The enhanced elongation properties of the film allow the tapes to be left on during many forming operations where damage may occur. Avoid prolonged exposure to direct UV sunlight which may affect the performance of the tape. The abrasion resistance testing was conducted using ASTM test method D4060 and a Taber Abrader employing a CS-10 wheel and 1000 grams auxiliary weights.

Polyimide Film

Model # 303-2

303-2 is a 2 mil, polyimide film and silicone adhesive has been designed for high temperature masking applications. In electrical insulation applications this product does meet class H requirements. This product can be removed cleanly without adhesive residue after exposure to heat/chemical.Used primarily for gold finger masking, coil insulation and high temperature harness wrapping.

PolyimidePrinted Circuit Board Masking

Model # 303-5

303-5 is a 5 mil, polyimide film and silicone adhesive is designed for high temperature masking applications, including the protection of printed circuit board gold finger contacts during wave soldering. This product can also be used in electrical insulation applications meeting class H requirements. These tapes are primarily used electrical applications including gold finger masking, insulation in transformers, coils, flat cables and high temperature harness wrapping.

Polyimide Insulation & PCB Mask

Model # 304-1

304-1 is a 2.5 mil polyimide film coated with high temperature silicone adhesive. The polyimide film provides excellent electrical insulation, abrasion resistance and high dielectric strength. This tape is used in electrical applications such as capacitor wrapping, gold finger masking, insulation in transformers, coils, flat cables and connectors and high temperature harness wrapping.

Polyimide Printed Circuit Board Mask

Model # 304-2

304-2 is a 3.5 mil polyimide film coated with high temperature silicone adhesive. The polyimide film provides excellent electrical insulations, abrasion resistance and high dielectric strength. This tape is used in electrical applications such as capacitor wrapping, gold finger masking, insulation in transformers, coils, flat cables and connectors and high temperature harness wrapping.

Flame Retardant Glass Cloth Tape

Model # 398FR

3M398FR is a 7.0mil, glass cloth tape. 398FR has an acrylic adhesive for many applications requiring high adhesion, an abrasion-resistant backing and flame retardant properties. This product is typically used for sealing aircraft cargo bay panels to provide a permanent seal. Replacement product for 367FR

High Temperature Solid Blue PVC Fine Line

Model # 4737S

4737S is a 5.1 mil, high temperature fine line vinyl paint masking tape for fascia, rocker panels, two-tone and other multiple color applications where critical paint lines are required. It is a solid (opague) blue whereas 4737T is a translucent blue.

GlassGuard EVA Surface Protection Tape

Model # 50550

tesa® 50550 Glassguard is a highly transparent clear tape designed to protect sensitive surfaces especially such as glass against scratches, holes or dirt. The tape is easily to unwind and good to apply – even onto curved 3D-surfaces. It has a good tack and final adhesion on flat surfaces.

High Performance Corrugated Splicing Tape

Model # 50658

50658 is a 4.7 mil double coated tissue used for splicing corrugated material. tesa 50658 is a high tack, high shear, double coated corrugated splicing tape. Utilizing a unique dispersion acrylic adhesive, it guarantees splices will hold even after exposure to heaing drums. Combined with extremely high tack for ensuring outstanding adhesions to even the roughest surfaces.

Tensilised Polypropylene Tape

Model # 51010

51010 is a 5 mil, polypropylene featuring the highest tensile strength available, it combines a tensilised PP backing with a strong sythetic rubber adhesive. The tape concept combines surperior tensile strength with an excellent flexibilty and (in contrast to glass fibre tapes) bend resistance. The product is especially recommended for reinforcement of various cardboard handles. Ideal applications also include reinforcement of stipping of shipping cartons as well as bundling and strapping of heavy goods and securing pallets, which are exposed to shocks during transport.

Large Area Masking Film

Model # 51121

51121 is a 4.7 mil, PE film used in overmasking for painting processes of large areas of painted and unpainted plastic parts such as bumpers and is normally used in combination with fineline tapes.

Soft Strapping Tape

Model # 51128

51128 is a 2.5 mil, translucent, TPP used to secure pallets loaded with boxes where labels/barcodes are important. It does not damage the surfaces of typical printed or labeled carton boxes after its removal. Once applied to a base or other surface, any text, barcode or graphics is clearly legible.

3.3 mil PE Large Area Masking Film

Model # 51132

51132 is a 3.3 mil, polyethylene tape for masking large areas of plastic parts during painting processes. It is is a premium grade self adhesive film that has been developed for the protection of various surfaces. especially interior parts of automobiles like dashboards and door sills during storage, assembly and transportation.

Large Area Masking Film

Model # 51134

51134 is a 3.31 mil, polyethylene film with an acrylic adhesive for masking large areas of plastic parts during professional painting processes. In addition to that it protects relably textile and rough surfaces especilly used in the automotive industry against dirt and damages during assembly and transport.

Polyimide Film Tape

Model # 51408

51408 is a 2.6 mil, special polyimide film backed tape with exceptional adhesive for outstanding durability. Thermal resistance, dimensional stability and puncture resistance are all built in, making it the right tape for many demanding applications.

Crepe Paper Masking Tape

Model # 53120

53120 is a 5.2 mil general-purpose masking tape. This product is recommended as a light-duty packaging tape and is good for bundling, holding, sealing and surface protection. It adheres to a variety of surfaces.

General Purpose Masking Tape

Model # 53123

53123 is a 4.7 mil, paper masking tape. It is primarily used for room temperature masking, light bundling and package closure. It has excellent adhesion to a variety of surfaces and provides flexibility during application.

High Strength Nick Resistant Tear Tape

Model # 53497

53497 is a 5.9 mil, tensilized polypropylene TPP spool wound tear tape. The specially extruded backing has excellent nick resistance when opening cartons and envelopes, ensuring easy one piece removal everytime. The ultra aggressive SIS adhesive provides a durable bond to a variety of corrugated and paper board grades. The silicone release system provides easy, quiet removal from the roll. It is available in a variety of lengths and widths for application flexibility. 53497 is used in heavy duty package reinforcement providing easy opening of corrugated and solid board boxes. Also used for tearstrip for courier envelopes and boxes.

High Temperature Paint Masking Tape

Model # 53606

53606 is a paper masking tape with consistent adhesion and excellent elongation characteristics. It is designed for critical paint applications. A high-strength paper and highly cured adhesive ensure ease of use in a wide variety of painting applications. It is specially formulated to resist temperature and paint seepage. 53606 has a built-in ultra violet resistance which enables it to come off cleanly even after being placed in sunlight.

HVAC Tape

Model # 558CA

558CA is a 14mil, metalized polyethylene coated cloth with printed UL listing, primarily used for UL listed flexible air ducts in accordance with manufacturer’s installation instructions. Approved by the California Energy Commission. Meets flexible duct sealing requirements for CA ruling AB970.

Durable PVC Tape

Model # 60760

60760 is a soft PVC with a clean removal rubber adhesive system. The durable PVC backing provides excellent impact and scuff resistance. The specially designed adhesive system has excellent initial tack, high holding power, yet it removes clean from surfaces.

Polyester Film Electrical Insulating Tape

Model # DWRAP

DWrap is a 1mil, blue, high temperature, high tensile, polyester film coated with a fully cured silicone adhesive. There is no contamination problem from the silicone adhesive because it is fully cured and does not transfer. D-Wrap is multi purpose high temperature tape designed for holding or masking operations in metalbond and plastic shops. Today it is in many other areas througthout the plant in chemical milling, riveting and paint shops. It is used as a maskant on pannels subject to caustic or acid bath etching. D-Wrap is far superior to paper tapes because it will not cause a fire in your oven or autoclave and it will not leave residue on your tool surfaces. D-Wrap has also been recommended for use by aircraft companies on metal surfaces that have been phosphoric annodized because it releases clean without leaving a residue.

High Temperature Masking Tape

Model # PG21A

PG21A is a high temperature masking tape consisting of a fine-structured crepe paper coated on one side with a rubber/resin adhesive. Conforms to SAE-AMS-T-21595.

Utility Paper Masking

Model # PG415

PG415 is a 5.3mil utility paper masking tape consisting of a coarse crepe paper backing coated in a natural/synthetic blended adhesive. It was designed for use in multiple general purpose applications.

Crepe Masking Tape

Model # PG501

PG501 is a 5.5 mil, medium grade, general industrial, smooth crepe, pressure-sensitive masking tape offering an excellent balance of quick stick, panel adhesion and holding properties. It’s special release coating provides an ‘extra measure’ of moisture & solvent resistance for applications such as acoustical coatings, etc. Not recommended for outdoor exposure.

Kraft Paper Masking Tape

Model # PG505

PG505 is a 5.8 mil, medium grade, industrial, pressure-sensitive masking tape. PG505 offers an excellent balance of quick stick, panel adhesion and holding properties. Not recommended for outdoor exposure.

Kraft Paper Masking Tape

Model # PG511

PG511 is a 5.0 mil, lightweight saturated crepe paper, coated with natural rubber pressure-sensitive adhesive. PG511 is designed primarily as an all-purpose product for non-critical applications. It adheres to and removes cleanly from a wide variety of surfaces. It has a smooth / controlled unwind. Thin profile for clean paint lines, tears easily & cleanly without stretching. Resistant to mild chemicals, solvents, and water. Meets C.I.D. A-A-883B, Type I. Not recommended for outdoor exposure. Other applications include: interior paint masking (mild paints), drafting, home workshop, butcher shop labeling and sealing, mail rooms, golf club shaft (build-up), for light-duty bundling, packaging & tabbing.

Autowrap

Model # . 0181

181 Autowrap is a pressure sensitive adhesive coated white UV stabilized polyolefin film masking. 181 is designed for the protection of automotive finishes during transit to the dealer and storage.

Autowrap

Model # . 0895

0895 Autowrap is a 2.2 mil, polyolefin film masking designed for the protection of automotive finishes during transit to the dealer and storage

4.8 mil LDPE Automotive Surface Protection

Model # . 505P

ProtecRite 7505 with a perf (P). A 4.8 mil LDPE product designed to protect automotive finishes and trim. Provides belt line protection and safeguard against consistent chronic surface damage, eliminating costly touch-ups and repainting.

Industrial Tape

Model # 627-35

627-35 is a 35mil, polyethylene, low density tape, primarily used under tile on the ridge and hip lines of roofs to prevent moisture from entering the building.

Solvent Acrylic Film Tape

Model # AD1235

AD1235 is 3.5 mil, performance solution, solvent acrylic film tape. The combination of superior polypropylene backing and premium performance solvent adhesive provides unsurpassed performance in the most demanding packaging applications. Engineered to provide secure closure for heavy content cartons and large bulky packages. It will withstand the most strenuous handling conditions.

PerfecTear™

Model # GXP575

GXP575 is a white, translucent, latex saturated paper used for vinyl graphics in sign making. A high tack paper application tape that consists of a self-wound, standard grade saturated backing coated with a specially formulated latex pressure sensitive adhesive. Excellent for pre-spaced lettering less than two inches small and medium sized one piece decals and hard to lift vinyls. All purpose application tape for most sign shop applications and surface protection.

High Temp Fine Crepe Automotive Masking

Model # 4318PV4

4318 is a 6.7 mil, finely creped, flexible paper masking tape. Especially suitable for the high requirements of automotive painting followed by oven-drying. Paints and even critical filler systems adhere very well to the backing avoiding any kind of flaking. It can be removed from rubber, glass and paint without leaving adhesive residue.

3.1mil Double Coated Tissue

Model # DCT100R

DCT100R is a 3.1 mil tissue tape consisting of a 10# tissue coated on both sides with an aggressive pressure-sensitive solventless synthetic rubber/resin adhesive that is engineered to bond to almost any surface. Features a silicone-coated kraft paper liner.

Premium 3.8mil Double Coated Tissue

Model # DCT102A

DCT102A is a 3.8mil tissue tape consisting of a tissue coated on both sides with an aggressive pressure sensitive acrylic adhesive that is engineered to bond to almost any surface. It features a 60# poly-coated white kraft paper liner.

Scothmate™ Indoor Reclosable Fastening Loop

Model # SJ3527N

SJ3527N is a 5/8″ wide nylon 6,6 black loop with a synthetic rubber adhesive that is suited for attachment to low surface energy substrates. It offers closure alternatives to zippers, screws, snaps, hooks, bolts and more. The hook & loop fastener consist of two strips of nylon fabric which engage to form a quick fastening attachment. Simply pull the strips apart by hand to disengage. The woven loop backing is covered with thousands of soft, pliable napped loops, providing for thousands of openings and closings. Application ideas are anti-scratch, medical braces, attaching exhibit displays, vibration & sound damping control, access panel & door closure and attaching accessories and equipment. ** not recommended for plasticized surfaces, test carefully on highly textured surfaces. See 3M data sheet for many more details.

High Temperature, Flexible, Fine Line Masking

Model # 4244 PV0

4244 PV0 is a 4.3 mil, high temperature, fine line masking tape. Its conformability to multi-dimensional surfaces, whether primed or painted, results from a very thin carrier and good elongation. 7386 withstands high multiple heat cycles without leaving residue. It can be removed warm or cool. Its silicone-free release system leaves no paint flakes.

All Purpose Masking Tape

Model # 4316 PV3

tesa® 4316 is a finely crêped paper masking tape. The product is thin and flexible and, therefore, suitable for all general masking applications, as well as oven drying applications up to a temperature of 100 °C.

White Polyethylene Surface Protection

Model # 03001-016

03000-018 is a 3 mil, white polyethylene film. A medium tack good performance masking tape for use in interior applications. The product consists of a low density film coated with a chemically stable water based acrylic adhesive.

Anti Static Polyimide Film

Model # 303 - ESD

303-ESD is a 2.5 mil, anti-static treated polyimide film coated with a silicone system. Static Charge @50% R.H. 70°F in ESD controlled environment. It is designed to minimize the effect of static during stripping and peeling. It offers optimal performance in electrical and thermal insulation and is highly resistant to heat and chemicals. It is thin and conformable but puncture resistant and tear resistant at high temperatures.

5.5 mil Colored Crepe Masking

Model # MASK 4400

MASK 4400 is a 5.5 mil colored masking tape with a crepe paper backing. It has a natural rubber & resin blend adhesive system. The adhesive is formulated for easy release and good adhesion to a variety of substrates. MASK 4400 is an economical general purpose masking that is conformable to many irregular surfaces. It is suitable for bundling, marking of defective parts or materials, produce marking, color coding, and polybag sealing. 3″ Neutral Core

5.0Mil Crepe Paper Masking Tape

Model # MASK 4420

MASK 4420 is a 5.0mil (0.127mm) utility grade masking tape consisting of a crepe paper backing with a solvent-based natural rubber adhesive system. This tape conforms to a broad range of surfaces. MASK 4420 is recommended for general purpose applications such as light bundling, sealing, holding, and air-dry commercial painting.

Black & White Polyethylene Surface Protection

Model # 03000-016B

03000-016B is a 3 mil, black on the inside, white on the outside, polyethylene film. It is used for surface protection of aluminum, painted metal, stainless steel and automotive paints.

Black & White Polyethylene Surface Protection

Model # 03000-028B

03000-028B is a 3 mil, black on the inside, white on the outside, polyethylene film. It is used for surface protection of anodized aluminum, painted metal, stainless steel and nameplates.

Black & White Polyethylene Masking Tape

Model # 03000-065B

03000-065B is a 4 mil, polyethylene film tape, coextruded, with white one the linerside and black on the unwind side. It is used for surface protection.

Clear Polyethylene Surface Protection

Model # 03001-001C

03001-001C is a 3 mil, low density polyethylene film used for surface protection. It is used to protect acrylic, glass, polycarbonate, polyester and polystyrene in particular.

Clear Polyethylene Surface Protection

Model # 03001-015C

03001-015C is a 3 mil, low density, film used for surface protection of glass, polycarbonate, polyester, polystyrene and other substrates.

Clear Polyethylene Surface Protection

Model # 03001-016C

03001-016C is a 3 mil, low density polyethylene film used for surface protection. It is used to protect painted metal, stainless steel & automotive parts.

Clear Polyethylene Surface Protection

Model # 03001-022C

03001-022C is a 3 mil, clear polyethylene film. It is used primarily for surface protection. A medium tack good performance masking tape for used in interior applications. The product consists of a low density, clear, polyethylene film coated with a chemically stable water based acrylic.

Clear Polyethylene Surface Protection

Model # 03001-028C

03001-028C is a 3 mil, clear polyethylene film. It is used primarily for surface protection. A medium tack good performance masking tape for used in interior applications. The product consists of a low density clear polyethylene film coated with a chemically stable water based acrylic.

White Polyethylene Surface Protection

Model # 03001-028W

03001-028W is a 3 mil polyethylene film used primarily for surface protection of stainless steel and many other metals with #3 & #4 finish sheets or coils. It is a medium tack, high performance masking tape for interior applications The product consists of a low density, white polyethylene film coated with a chemically stable water based acrylic adhesive.

Clear Polyethylene Surface Protection

Model # 03001-042C

03001-042C is a 3 mil polyethylene film used primarily for surface protection of stainless steel, aluminum and many other metals with #3 & #4 finish sheets or coils. It is a medium tack, high performance masking tape for interior applications. The product consists of a low density, clear polyethylene film coated with a chemically stable water based acrylic adhesive.

White Polyethylene Masking Tape

Model # 03001-042W

03001-042W is a 3 mil polyethylene film used primarily for surface protection of stainless steel, aluminum and many other metals with #3 & #4 finish sheets or coils. It is a medium tack, high performance masking tape for interior applications. The product consists of a low density, white polyethylene film coated with a chemically stable water based acrylic adhesive.

White Polyethylene Surface Protection

Model # 03001-048W

03001-048W is a 3 mil, low density, polyethylene film with a chemically stable water based acrylic adhesive. A medium tack performance masking tape, primarily for surface protection of anodized aluminum, semi and low gloss painted metal, dry and wet stainless steel.

Black & White Polyethylene Surface Protection

Model # 03001-065B

03001-065B is a 3 mil, black on the inside, white on the outside, polyethylene film. It is used for surface protection of anodized aluminum, painted metal, stainless steel and nameplates.

Clear Polyethylene Surface Protection

Model # 03001-065C

03001-065C is a 3 mil, clear polyethylene film. It is used primarily for surface protection. A medium tack, good performance masking tape for use in interior applications. The product consists of a low density, clear, polyethylene film coated with a chemically stable water based acrylic.

White Polyethylene Masking Tape

Model # 03001-068W

03001-068W is a 3 mil polyethylene film used primarily for surface protection of stainless steel, aluminum and many other metals with #3 & #4 finish sheets or coils. It is a medium tack, high performance masking tape for interior applications. The product consists of a low density, white polyethylene film coated with a chemically stable water based acrylic adhesive.

Clear Polyethylene Masking Tape

Model # 03001-120C

03001-120C is a 3 mil polyethylene film used primarily for surface protection of laminates & nameplates. It is a medium tack, high performance masking tape for interior applications. The product consists of a low density, clear polyethylene film coated with a chemically stable water based acrylic adhesive.

Clear Polyethylene Surface Protection

Model # 03M00-042C

03M00-042C is a 3 mil polyethylene film used primarily for surface protection of stainless steel. It is a medium tack, high performance masking tape for interior applications. The product consists of a low density, clear polyethylene film coated with a chemically stable water based acrylic adhesive.

Clear Polyethylene Surface Protection

Model # 03M00-048C

03M00-048C is a 3 mil polyethylene film used in interior applications of surface protection of stainless steel. A medium tack good performance masking tape consists of a low density film coated with a chemically stable water based acrylic adhesive.

Safety Walk™ Medium Texture Anti-Slip Tape

Model # 310 Safety

Safety Walkâ„¢ 310 is a black 45 mil, soft textured, non-mineral, medium resilient surface bonded to a pressure-sensitive adhesive backed plastic film. It is designed for barefoot or shoe traffic areas. The textured resilient high friction surface and durable adhesive provide long-lasting performance. Available in treads, tapes, or custom converted shapes and sizes. 3M Safety Walkâ„¢ slip-resistant tapes and treads adhere to clean, dry surfaces without wrinkling, curling, tearing, shrinking, or lifting. They offer proven durability for a long life. The pressure sensitive adhesive backing makes it easy to apply tapes without the use of anchoring. Safety Walkâ„¢ products meet or exceed the standards and recommended guidelines for slip resistance in accordance with ASTM requirements. Safety Walkâ„¢ products are available in standard rolls and pre-cut treads, or can be custom converted into specialty sizes and shapes.

3M™ Sandblast Stencil

Model # 510STENCIL

510 is a 45 mil, light green rubber backing with rubber adhesive and easy-release clear film liner. Hand-cut – single liner format. It is used in sandblast stencils.

60 Mil Indoor/Outdoor Magnetic Tape

Model # MAGNET 5250

MAGNET 5250 is a 60 Mil indoor/outdoor adhesive magnetic tape consisting of a 4.5 mil double coated polyester tape with a high performance acrylic based adhesive system laminated to a multipole one face flexible magnet and supplied on a semi-bleached kraft liner. This indoor/outdoor adhesive was designed for bonding applications where outstanding adhesion, high shear, and good solvent resistance are required. The acrylic adhesive offers good clarity and has excellent resistance to UV light exposure. The polyester carrier provides dimensional stability and superior die-cutting properties.

5.5Mil Low Density Polyethylene Film Tape

Model # PEFILM 4570

PEFILM 4570 is a 5.5mil low density polyethylene film tape coated on one side with a synthetic rubber adhesive that remains permanently tacky and bonds well to most surfaces over a wide range of temperatures. This tape provides an excellent low temperature bond, and the tough polyethylene backing offers good abrasion and tear resistance. This highly conformable tape is waterproof and resistant to chemical deterioration. PEFILM 4570 is ideal for polyethylene splicing, patching/repairing poly sheeting used in the boating and RV industry, surface protection and electroplate masking, weire identification, packaging, and more. It works well in most applications where a low thread count polyethylene coated cloth tape is being used.

D-Max – HVOF/Plasma Tape

Model # D-MAX - HVOF TAPE

D-Max – HVOF/Plasma Tape is Dewal’s only one-step masking tape that will provide the ultimate protection during the destructive spray process of HVOF. This product has a proprietary rubber backing and is designed to perform where others have failed. D-Max….Max Protection, Max Temperature, Max Adhesion, Max Flexibility and Max Value.