Double Coated Polyethylene Foam Tape

Model # 4466W

3M 4466 is a 62.0 mil. double coated polyethylene foam tape with rubber adhesive is ideal for many joining, mounting, gasketing, and sealing applications involving irregular surfaces. 4466W tape combines a conformable closed cell foam with a rubber adhesive that provides high initial adhesion to a variety of surfaces including polyethylene and polypropylene. This tape uses 745 rubber, pressure-sensitive adhesive that provides excellent initial tack and adhesion to a wide variety of surfaces, including many low surface energy plastics. Solvent splash testing cycle = 20 seconds submersion and 20 seconds air dry through 3 cycles. Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength. To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbing alcohol) or water. Be sure to follow the manufacturer’s precautions and directions for use when using cleaning solvents. Initial tape application to surfaces below 50°F is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. See 3M data sheet for Dispenser Suggestions.

• 40.00 lbs/in

Request A Quote