The GS-Series of strip adhesives are made up of an unsupported SBR pressure sensitive adhesive, specially coated by MACtac using a patented, proprietary process and wound on a 60# densified kraft release liner. The GS series is also available with a 2 mil polyester liner as a custom construction. The adhesive used in the series provides very aggressive tack and peel adhesion along with superior shear strength. This adhesive bonds to a wide variety of meterials including low energy surfaces such as polyethylene and polypropylene. The standard thicknesses of 5 to 50 mils provides the mass needed to establish secure bonds to uneven or irregular surfaces. The strip adhesives are available in a number of narrow width sizes ranging from 1/4″ to 11 1/2″. Typically provided as a single or double strip of adhesive on the liner.