High speed flying splice – Stabilized, acrylic transfer film; Kraft release liner. Specifically designed to meet the demanding end use requirement of high speed flying splice; mounting of nameplates, splicing, framing and matting.

Adhesion and long term aging – High performance; acrylic transfer film; Kraft release liner. Specifically designed to provide excellent adhesion and long term aging on a wide variety of surfaces; laminating to foam for gasketing and sound attenuation; application of decorative parts and mounting of rubber extrusions.

Mounting, splicing and laminating – .5 mil double-coated polyester backing; ultra high tack, moderate shear, rubber adhesive. For bonding to polyurethane, polyethylene foams and various other grades of felts, sponges and cork; mounting, splicing, laminating and holding applications.

High speed splicing – Double-coated, hand tearable, polyester carrier; high tack, acrylic adhesive. For high speed splicing of paper, plastic, films and fiberboard.

Carpet hold down – Double-coated polyethylene film; permanent adhesive; thin profile allows conformability and permanency. General purpose double-coated applications; excellent carpet hold down.

General purpose mounting – Double-coated crepe paper; high tack, rubber adhesive. General purpose mounting, bonding and splicing applications.

Mounting printing plates in Flexographic printing – Double-coated vinyl with smooth unwind to ensure easy cylinder coverage. Designed specifically for use in mounting of printing plates in Flexographic printing.

Splicing, holding, mounting and laminating – Double-coated .75 mil biaxially-oriented polypropylene film; permanent adhesive system. Excellent for high strength core start-up, web splicing and holding; used in a wide variety of splicing, holding, mounting, laminating and attaching decorative trim.

Mounting and splicing – Double-coated flatback paper; easy release crepe liner. Used for mounting of rubber printing plates and splicing; bonds to almost any surface; installation of golf club grips. Meets Spec: UU-T-91D, Type II.

General purpose splicing and bonding – Double-coated lightweight tissue paper; high adhesion, rubber adhesive. For general purpose bonding and splicing operations requiring a thin, conformable tissue reinforced tape.

Parts machining – Double-coated 3.5 mil crepe paper; synthetic-based adhesive. For use in parts machining, where removal of tape is essential; core start-up.

Mounting plastic metal or wood – Double-coated, transparent, polyester film; pink polypropylene release liner. For use in mounting of plastic, metal or wood.

Bonds to rough and porous surfaces – Double-coated UPVC film, high coat weight carrier; high performance, acrylic adhesive. Bonds to rough or porous surfaces; joins extruded plastic and metal components; bonds EPDM rubbers and urethane foams.

High performance mounting – Double-coated vinyl; soft PVC, black plate mount; high performance rubber adhesive. Primarily developed for high performance mounting of photopolymer and rubber plates in Flexographic printing; high adhesion and good shear resistance for high speed and extended print runs.

Industrial and automotive bonding – Double-coated 1/32″”” thick”

Bonding plastics – Double-coated .5 mil polyester film; acrylic adhesive. For bonding of plastic materials for signs and posters, nameplates and general purpose bonding; low outgassing product.

Easy to identify splices – Double-coated 1 mil biaxally-oriented polypropylene film; aggressive, red-colored adhesive. Designed for easy to identify splicing in paper, films and a variety of substrates; developed for continuous web where a visual splice is critical.

Automotive cushioning – Double-coated

Automotive trim mounting – Double-coated

Automotive mounting, joining, gasketing and sealing – Double-coated

Temporary bonding – Double-coated polyester carrier; removable acrylic adhesive on liner side/rubber adhesive on exposure side. For mounting of artwork and other temporary bonding applications; temporary labels and window decals.

Sound dampening, gasketing and shock absorbtion – Double-coated

Sound dampening, gasketing and shock absorbtion – Double-coated

Sound dampening, gasketing and shock absorbtion – Double-coated

Gasketing, dampening and decorative trim – Double-coated 1/32″”” thick polyethylene foam; high performance acrylic adhesive. Also available in 1/16″””” thick (#361) and 1/8″””” thick (#362). Used for glazing tape sound attenuation”

Gasketing, dampening and decorative trim – Double-coated 1/16″”” thick polyethylene foam; high performance acrylic adhesive. Used for glazing tape sound attenuation”

Gasketing, dampening and decorative trim – Double-coated 1/8″”” thick polyethylene foam; high performance acrylic adhesive. Used for glazing tape sound attenuation”

Mounting – Double-coated 1/8″”” thick cross-linked”

Mounting – 1/8″”” thick; 2# density”

Mounting on irregular surfaces – Double-coated, white flexible fabric backing; siliconized liner; rubber adhesive. High coating weight is well suited for mounting on irregular surfaces; splicing textiles, synthetics and carpet installation.