Premium grade, all weather – Premium grade; 8.5 mil black plastic vinyl, all weather, electrical tape; high dielectric strength; flame retardant; resists chemicals, solvents and cold temperatures. Primary insulation for splices up to 600 volts; offers complete electrical and mechanical protection; excellent for low temperature protective outer jacket. Meets Specs: MIL-I-24392C; UL & CSA approved.
General purpose all weather – General purpose grade; 7 mil plastic vinyl, all weather, electrical tape; flame retardant (available in nine colors). Thin, tough, resilient tape primarily used for quick identification and color coding of electrical phases, circuits, feeders and branches; resists chemicals, acids, abrasion, corrosion, moisture and sunlight. Meets Specs: HH-I-595C; ASTM-D-3005; UL and CSA approved.
Economy grade all weather – Economy grade; 7 mil plastic black, all weather, vinyl electrical tape; flame retardant. Primary insulation of not more than 600 volts; general splicing, wrapping and jacketing applications Meets Spec: UL 510 approved.
Premium grade, all weather – Premium grade; 7 mil plastic vinyl, all weather, vinyl electrical tape; flame retardant (available in nine colors). For quick identification and color coding of electrical circuits, containers, conduit systems; primary insulation of not more than 600 volts. Meets Specs: UL 510, CSA 22.2; ASTM-D-3005; HH-I-595C.
Insulating and anchoring – Electrical grade; high tensile, woven glass cloth; high tack, thermosetting rubber- resin adhesive; maximum resistance to solvents and adhesive softening. For insulating connections, anchoring lead wires, banding heavy conductor coils, harness wrapping, coil wrapping and barrier insulation. Meet Specs: MIL-l-15126, Type GFT; MIL-T-4053B.
General applications – 1 mil polyester film; thermosetting acrylic adhesive (available in clear and yellow). Tough, conformable, thin tape for general electrical applications that require good solvent resistance.
Heat resistant to 130 degrees C – 1 mil polyester film with thermosetting rubber adhesive (available in clear and yellow). Tough, thin, abrasion resistant tape for use in electrical applications requiring a temperature performance up to 130°C. Meets Spec: MIL-I-15126F, Type MFT.
Premium grade, all weather – Premium grade; 7.5 mil all weather, flame retardant PVC; resists extremely cold temperatures (available in black and gray). High performance electrical applications requiring moisture-tight electrical and mechanical protection in extreme environments; resists chemicals, acids, abrasion, corrosion, moisture and sunlight. Meets Specs: UL 510; CSA approved.
General purpose – General purpose/electrical grade; 7 mil plastic vinyl; higher dielectric strength than similar imported
General purpose – General purpose/electrical grade; plastic vinyl; higher dielectric strength than similar imported or domestic tapes (3/4″”” x 60′). Used in electrical applications requiring a higher dielectric strength; provides complete electrical and mechanical protection. Meets Specs: MIL-I-7798A (domestic only); UL and CSA approved.”””””
Abrasion resistant – 2 mil polyester film; non-corrosive, thermosetting rubber adhesive; resists abrasion (available in clear and yellow). Tough abrasion resistant tape used for a variety of electrical applications requiring temperature performance up to 130 degrees C. Meets Spec: MIL-I-15126F, Type MFT.
Stable at operating temperatures to 385 degrees F – 1.5 mil polyester film; 1 mil pre-cured silicone adhesive; electrically and mechanically stable at operating temperatures up to 385 degrees F (colors). Used for splicing of silicone-coated papers; designed to perform in all phases of the masking of PCB production.
High temperature – Electrical grade; glass cloth; silicone adhesive; resists chemicals and solvents. High temperature electrical applications requiring a chemical and solvent resistant tape. Meets Specs: MIL-I-19166C; Type 7; UL recognized.
PCB masking – 1 mil polyester film; 3 mil silicone adhesive (red). Used for stop-off applications in the production of printed circuit boards; particularly for use in tin/lead stripping
Overwrap – 30 mil self-fusing, low voltage, rubber electrical splicing tape; resists moisture (black). For overwrap of electrical insulation splices which require a moisture resistant tape. Meets Spec: UL 510.
All purpose – General purpose grade; 15 mil cotton cloth, friction tape; coated on 2-sides with a black rubber adhesive. All purpose mechanical tape which provides good adhesion to all types of surfaces; provides protection against abrasion and penetration of cable, splices and wire. Meets Specs: ASTM D-69; HHT-I-510D; Comm. Spec. 6747, HHT 101A.
General purpose grade – Electrical grade; 7 mil flame retardant
Production grade – Production grade; 10 mil flame retardant, glass cloth; offers maximum resistance to chemicals and solvents; silicone adhesive. General purpose vinyl tape for mechanical, electrical applications and primary insulation for splices of not more than 600 volts. Meets Specs: UL 510; MIL-I-19166C, Type 10; MIL-T-4053B.
General purpose; printable – General purpose; 6 mil printable, woven polyester fabric; high tensile, high shear strength; thermosetting rubber adhesive (black or white). Used for a wide variety of general purpose outlet coil wrapping and insulation layering applications; printable for outer wrap coils; good conformability; high tear resistance.
General purpose and transformer construction – Flexible, conformable, 11 mil white polyester knit fabric; thermosetting, rubber adhesive. Used for coil wrapping, holding, bundling and binding in general purpose and transformer construction applications.
Highly conformable – 7.5 mil absorbent, white cotton cloth; thermosetting, natural rubber adhesive; resists abrasion. Highly conformable tape for wrapping in class 105 degrees C applications.
Insulating – General purpose; glass-reinforced, polyester film; thermosetting rubber adhesive. Used primarily for electrical insulation applications up to 130 degrees C; abrasion resistant backing is absorbent for extra impregnation.
Highly conformable – General purpose; glass-reinforced polyester film; thermosetting acrylic adhesive. Highly conformable tape for electrical insulation in class 155 degrees C applications.
Composite insulating and transformer construction – 4 mil polyester; matte reinforced with thermosetting rubber adhesive (clear). Used for composite insulating, coil wrapping and holding in transformer construction; provides excellent resistance to edge tear and solvents.
Coil and transformer insulation – 1 mil flame retardant polyester film; clear acrylic adhesive (yellow and white). All purpose coil and transformer insulation and production applications. Meets Spec: UL Recognized.
General purpose, heavy duty – General purpose; heavy duty; 10 mil black vinyl; high dielectric strength; flame retardant. Maximum performance in mechanical and electrical applications; primary insulation for splices of not more than 600 volts; heavier thickness results in quicker build up and added protection.
Leader card splicing – 2 mil polyester film; coated with a specially-formulated, high adhesion, non-residuing, pure silicone adhesive (translucent red). High performance leader card splicing tape used for bonding of photographic film in automated processing equipment; provides excellent holding power, chemical and heat resistance.
Masking powder paint – 2 mil polyester film; high performance, silicone adhesive. Used primarily for masking in powdered painting applications; provides clean removal from powdered coated surfaces.
General purpose – 2.5 mil polyester film; silicone adhesive (transparent). For general purpose splicing and metal bonding applications.
Attach film to leader cards – 3.4 mil polyester film, heavy duty; high temperature silicone adhesive. Used primarily for attaching film to leader card on automatic photo developing and printing equipment.