62 mil UHMW polyethylene; rubber adhesive. Same thickness available in acrylic adhesives when required. More abrasion resistant than PTFE with excellent properties. Resists puncture and gouging under pressure and load. The ideal choice to prolong the life of conveyor belts and to protect chute guide rails and bearings. UHMW/Polyolefin is FDA approved and suitable for temperatures up to 225 degrees F. Detailed specs available on request.
7 mil flame retardant dead soft aluminum foil/glass cloth laminate; non-corrosive, high temperature transport silicone adhesive. Used as masking tape in plasma spray applications for jet engine repair; seaming/repairing heat and flame barrier curtains; to protects various missile components such as control cables, harnesses, fuel lines; for wrapping wire harnesses; masking irregularly shaped components; to secure thermal insulation on heating/ventilation ducts; serves as shield for cables on aircraft and in aerospace industry. Meets Specs: MIL-T-83284; McDowell Douglas STM 0683; Martin Morietta STM 1505.
Interior grade; thermoplastic aromatic polyurethane adhesive; 92 lb. polycoated release liner (transparent). Heavy duty repositionable tape to protect surfaces in high and low temperatures; prevents scratching and chipping due to constant abrasion; used in long and short term for shot peening in metal cleaning, automotive, marine and OEM surface protection applications for vibration and sound dampening for including air foil and ground effects panels in motorsports.
Economy grade, abrasion resistant, shiny SPVC film
Economy grade; abrasion resistant, stabilized plasticized shiny SPVC film; non-corrosive, natural rubber adhesive (striped colors). Warning stripe tape for floor, lane and aisle marking; color coding, identification of safety and caution areas; wrapping and insulation of air ducts and underground pipes; resists acids, alkalides, oils, moisture, humidity and corrosion. Meets Specs: A-A-1689B; PPP-T-66E.
Economy grade, abrasion resistant, shiny SPVC film
Stabilized, acrylic transfer film; Kraft release liner. Specifically designed to meet the demanding end use requirement of high speed flying splice; mounting of nameplates, splicing, framing and matting.
High performance; acrylic transfer film; Kraft release liner. Specifically designed to provide excellent adhesion and long term aging on a wide variety of surfaces; laminating to foam for gasketing and sound attenuation; application of decorative parts and mounting of rubber extrusions.
Insulated, HVAC all surface jacket (ASJ); backing is UL Listed; all temperature, acrylic adhesive. Used to butt join cold and dual temp duct and pipe systems and seal seams in pipe covering. Service temp range of 0 degrees F to 150 degrees F. Meets Spec: UL Listed.
