2 mil skived PTFE; acrylic adhesive. Higher elongation with greater conformability than High Modulus PTFE. Good strength, abrasion resistance and the low friction properties of Skived PTFE make it a prime choice for mechanical applications, from lining guide rails to wrapping airframe wire harnesses. Detailed specs available on request.
2 mil skived PTFE, silicone adhesive. Higher elongation with greater conformability than High Modulus PTFE. Good strength, abrasion resistance and the low friction properties of Skived PTFE make it a prime choice for mechanical applications, from lining guide rails to wrapping airframe wire harnesses. Detailed specs available on request.
Premium grade; 20 mil PVC film; PSA. Premium grade tape with non-corrosive adhesive and thicker backing than #721 for wrapping pipes to prevent corrosion.
20 mil UHMW polyethylene; rubber adhesive. Same thickness available in acrylic adhesives when required. More abrasion resistant than PTFE with excellent properties. Resists puncture and gouging under pressure and load. The ideal choice to prolong the life of conveyor belts and to protect chute guide rails and bearings. UHMW/Polyolefin is FDA approved and suitable for temperatures up to 225 degrees F. Detailed specs available on request.
General purpose grade; 25 micron cast biaxially-oriented polypropylene (BOPP) film; aggressive, synthetic rubber/resin hot melt adhesive. For sealing of light weight cartons with minimal exposure to handling, shipping and load stress. Meets Specs: CID-A-A-1684C; ASTM-D1974.
3 mil dead soft aluminum foil; acrylic adhesive; no release liner. Specifically designed for economical harness wrap applications, heat reflection, masking and duct sealing; adhesive creates superior bond and sticks to itself well.
3 mil dead soft aluminum foil; acrylic adhesive; paper release liner. Specifically designed for economical harness wrap applications, heat reflection, masking and duct sealing; adhesive creates superior bond and sticks to itself well.
3 mil dead soft aluminum foil; aggressive acrylic adhesive; no release liner. Designed for use on variety of flat, irregular or curved surfaces far vapor barrier protection, waterproof sealing, heat reflection/dissipation, masking for paint stripping and electroplating; has high-adhesion to backing; may be applied at low temperature; good high/low temp resistance. Meets Specs: L-T-80B, MIL-T-23397B; AMDT 2 TYPE II.
