1.4 mil copper foil; conductive acrylic adhesive. Aluminum and copper foil tapes are available in a variety of thicknesses, coated with either an acrylic or silicone adhesive. Several products are available with embossed substrates for applications where EMI/RFI shielding is required. Detailed specs available on request.

1.4 mil copper foil; non-conductive acrylic adhesive. Aluminum and copper foil tapes are available in a variety of thicknesses, coated with either an acrylic or silicone adhesive. Several products are available with embossed substrates for applications where EMI/RFI shielding is required. Detailed specs available on request.

General purpose. 1.5 mil dead soft aluminum foil; extremely aggressive clear acrylic adhesive; 3 mil release liner. Use on variety of flat, irregular or curved surfaces for non-critical applications such as sealing out dust and moisture, masking and duct sealing; from 10 degrees F to 120 degrees F; service temperature range from 0 degrees F to 150 degrees FF. Meets Spec: UL510, Section 4 for Flammability.

1 mil Kapton film, silicone adhesive. Provides the best Class 180 insulation available. Typical applications include wrapping and splicing of wire and cables, and as a mask for wave soldering of printed circuit boards. Superior dielectric strength; excellent tear and abrasion resistance. Detailed specs available on request.

1 mil Kapton film; acrylic adhesive. Provides the best Class 180 insulation available. Typical applications include wrapping and splicing of wire and cables, and as a mask for wave soldering of printed circuit boards. Superior dielectric strength; excellent tear and abrasion resistance. Detailed specs available on request.

1 mil Kapton film; low static version. Provides the best Class 180 insulation available. Typical applications include wrapping and splicing of wire and cables, and as a mask for wave soldering of printed circuit boards. Superior dielectric strength; excellent tear and abrasion resistance. Detailed specs available on request.

10 mil flame retardant dead soft aluminum foil/glass cloth laminate; non-corrosive, high temperature transport silicone adhesive. Used as masking tape in plasma spray applications for jet engine repair; seaming/repairing heat and flame barrier curtains; to protects various missile components such as control cables, harnesses, fuel lines; for wrapping wire harnesses; masking irregularly shaped components; to secure thermal insulation on heating/ventilation ducts; serves as shield for cables on aircraft and in aerospace industry. Meets Specs: MIL-T-83284; McDowell Douglas STM 0683; Martin Morietta STM 1505.

10 mil high modulus PTFE; acrylic adhesive. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

10 mil high modulus PTFE; silicone adhesive. Same thicknesses available in etched version. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

10 mil PTFE coated glass fabric; silicone adhesive. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

10 mil PTFE coated glass fabric; acrylic adhesive. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

10 mil skived PTFE; acrylic adhesive. Higher elongation with greater conformability than High Modulus PTFE. Good strength, abrasion resistance and the low friction properties of Skived PTFE make it a prime choice for mechanical applications, from lining guide rails to wrapping airframe wire harnesses. Detailed specs available on request.

10 mil skived PTFE, silicone adhesive.Higher elongation with greater conformability than High Modulus PTFE. Good strength, abrasion resistance and the low friction properties of Skived PTFE make it a prime choice for mechanical applications, from lining guide rails to wrapping airframe wire harnesses. Detailed specs available on request.

10 mil UHMW polyethylene; rubber adhesive. Same thickness available in acrylic adhesives when required. More abrasion resistant than PTFE with excellent properties. Resists puncture and gouging under pressure and load. The ideal choice to prolong the life of conveyor belts and to protect chute guide rails and bearings. UHMW/Polyolefin is FDA approved and suitable for temperatures up to 225 degrees F. Detailed specs available on request.

14 mil PTFE coated glass fabric; silicone adhesive. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

14 mil PTFE coated glass fabric; acrylic adhesive. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

15 mil UHMW polyethylene; rubber adhesive. Same thickness available in acrylic adhesives when required. More abrasion resistant than PTFE with excellent properties. Resists puncture and gouging under pressure and load. The ideal choice to prolong the life of conveyor belts and to protect chute guide rails and bearings. UHMW/Polyolefin is FDA approved and suitable for temperatures up to 225 degrees F. Detailed specs available on request.

2 mil dead soft aluminum foil; conductive, acrylic adhesive; 60 lbs. release liner. Specifically designed for EMI/RFI shielding and cable wrap applications; excellent conformability to irregular surfaces; adhesive is uniformly dispersed with conductive spheres to provide very high EMI/RFI shielding. Meets Spec: UL 510, Section 4 for Flame Spread requirement.

2 mil FEP; silicone adhesive. Optically clear tape for applications where clarity is needed; used in applications up to 400 degrees F. Detailed specs available on request.

2 mil FEP; acrylic adhesive. Optically clear tape for applications where clarity is needed; used in applications up to 400 degrees F. Detailed specs available on request.