General purpose grade; 1.1 mil clear Vylon reinforced film; synthetic rubber blend adhesive. Vylon reinforcing tape for various closure applications; excellent performance in wide temperature range from 0 degrees F to 200 degrees F. Meets Specs: PPP-T-70A; CID-A-A-1684A.

General purpose grade; 1.2 mil low elongation, cast OPP film; aggressive, natural rubber adhesive. For use in all types of sealing application, mailrooms, moving and storage; excellent for freezer applications involving food, and sub-zero temperatures for winter shipments.

Economy grade; 1.2 mil printable polypropylene film; rubber adhesive. General purpose carton sealing tape; offers custom printed message options.

General purpose grade; 1.3 mil, printable low elongation, UPVC film; aggressive, natural rubber adhesive (colors). For hand dispenser or manual sealing of cartons with recycled paper content, rough or smooth surfaces and heavy ink coverage; excellent performance in sub-zero, humid and damp conditions; reduces application time and eliminates excessive rundown; offers custom printed message options.

1.4 mil copper foil; conductive acrylic adhesive. Aluminum and copper foil tapes are available in a variety of thicknesses, coated with either an acrylic or silicone adhesive. Several products are available with embossed substrates for applications where EMI/RFI shielding is required. Detailed specs available on request.

1.4 mil copper foil; non-conductive acrylic adhesive. Aluminum and copper foil tapes are available in a variety of thicknesses, coated with either an acrylic or silicone adhesive. Several products are available with embossed substrates for applications where EMI/RFI shielding is required. Detailed specs available on request.

General purpose. 1.5 mil dead soft aluminum foil; extremely aggressive clear acrylic adhesive; 3 mil release liner. Use on variety of flat, irregular or curved surfaces for non-critical applications such as sealing out dust and moisture, masking and duct sealing; from 10 degrees F to 120 degrees F; service temperature range from 0 degrees F to 150 degrees FF. Meets Spec: UL510, Section 4 for Flammability.

Bag lock; 1.5 mil low elongation, UPVC film; aggressive, natural rubber adhesive (colors). For bag lock closure tape/produce tape.

Commercial grade; 1.57 mil printable polypropylene film; rubber adhesive. Carton sealing tape; offers custom printed message options.

Heavy duty grade; 1.6 mil clear, polypropylene film; acrylic adhesive. All purpose carton sealing tape for cold room applications, label protection and over laminating in manual and automated case sealing applications; performs in wide temperature range.

Heavy Duty grade; 1.6 mil low elongation cast OPP film; aggressive, natural rubber adhesive. Used in both manual and automated applications where a premium performance tape is needed; performs well in sub-zero temperatures, freezer environments and unheated warehouses.

1 mil Kapton film, silicone adhesive. Provides the best Class 180 insulation available. Typical applications include wrapping and splicing of wire and cables, and as a mask for wave soldering of printed circuit boards. Superior dielectric strength; excellent tear and abrasion resistance. Detailed specs available on request.

1 mil Kapton film; acrylic adhesive. Provides the best Class 180 insulation available. Typical applications include wrapping and splicing of wire and cables, and as a mask for wave soldering of printed circuit boards. Superior dielectric strength; excellent tear and abrasion resistance. Detailed specs available on request.

1 mil Kapton film; low static version. Provides the best Class 180 insulation available. Typical applications include wrapping and splicing of wire and cables, and as a mask for wave soldering of printed circuit boards. Superior dielectric strength; excellent tear and abrasion resistance. Detailed specs available on request.

Economy grade; 1 mil, low elongation, cast OPP film; aggressive, natural rubber adhesive. For use in all types of sealing applications, mailrooms, moving and storage; excellent for freezer applications involving food, and sub-zero temperatures for winter shipments.

10 mil flame retardant dead soft aluminum foil/glass cloth laminate; non-corrosive, high temperature transport silicone adhesive. Used as masking tape in plasma spray applications for jet engine repair; seaming/repairing heat and flame barrier curtains; to protects various missile components such as control cables, harnesses, fuel lines; for wrapping wire harnesses; masking irregularly shaped components; to secure thermal insulation on heating/ventilation ducts; serves as shield for cables on aircraft and in aerospace industry. Meets Specs: MIL-T-83284; McDowell Douglas STM 0683; Martin Morietta STM 1505.

10 mil high modulus PTFE; acrylic adhesive. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

10 mil high modulus PTFE; silicone adhesive. Same thicknesses available in etched version. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

10 mil PTFE coated glass fabric; silicone adhesive. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

10 mil PTFE coated glass fabric; acrylic adhesive. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

General purpose grade; 10 mil PVC film; PSA (black, yellow, white). Designed with non-corrosive adhesive and thick backing to wrap pipes for protection in corrosive environments.

10 mil skived PTFE; acrylic adhesive. Higher elongation with greater conformability than High Modulus PTFE. Good strength, abrasion resistance and the low friction properties of Skived PTFE make it a prime choice for mechanical applications, from lining guide rails to wrapping airframe wire harnesses. Detailed specs available on request.

10 mil skived PTFE, silicone adhesive.Higher elongation with greater conformability than High Modulus PTFE. Good strength, abrasion resistance and the low friction properties of Skived PTFE make it a prime choice for mechanical applications, from lining guide rails to wrapping airframe wire harnesses. Detailed specs available on request.

10 mil UHMW polyethylene; rubber adhesive. Same thickness available in acrylic adhesives when required. More abrasion resistant than PTFE with excellent properties. Resists puncture and gouging under pressure and load. The ideal choice to prolong the life of conveyor belts and to protect chute guide rails and bearings. UHMW/Polyolefin is FDA approved and suitable for temperatures up to 225 degrees F. Detailed specs available on request.

14 mil PTFE coated glass fabric; silicone adhesive. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

14 mil PTFE coated glass fabric; acrylic adhesive. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

15 mil UHMW polyethylene; rubber adhesive. Same thickness available in acrylic adhesives when required. More abrasion resistant than PTFE with excellent properties. Resists puncture and gouging under pressure and load. The ideal choice to prolong the life of conveyor belts and to protect chute guide rails and bearings. UHMW/Polyolefin is FDA approved and suitable for temperatures up to 225 degrees F. Detailed specs available on request.

1/8"" thick; 2# density

3/8"" thick low 2 Lb. density open cell ester formulation polyurethane dark gray foam; high tack synthetic rubber adhesive. Foam with high flexibility and good recovery for variety of applications including gasketing

Premium grade; 2 mil clear tensilized Vylon film; high grade emulsion acrylic adhesive. Reinforcing tape with easy release to facilitate use of wide widths and automatic equipment; highly resistant to chemicals, resins, corrosion, mildew, bacteria and fungi; wide temperature range from -30 degrees F to 200 degrees F.

2 mil dead soft aluminum foil; conductive, acrylic adhesive; 60 lbs. release liner. Specifically designed for EMI/RFI shielding and cable wrap applications; excellent conformability to irregular surfaces; adhesive is uniformly dispersed with conductive spheres to provide very high EMI/RFI shielding. Meets Spec: UL 510, Section 4 for Flame Spread requirement.

2 mil FEP; silicone adhesive. Optically clear tape for applications where clarity is needed; used in applications up to 400 degrees F. Detailed specs available on request.

2 mil FEP; acrylic adhesive. Optically clear tape for applications where clarity is needed; used in applications up to 400 degrees F. Detailed specs available on request.

2 mil high modulus PTFE; acrylic adhesive. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

2 mil high modulus PTFE; silicone adhesive. Same thicknesses available in etched version. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

Extra strength; 2 mil high modulus PTFE; silicone adhesive. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.

Extremely high strength; 2 mil high modulus (PTFE); silicone adhesive. The combination of low elongation, high tensile strength and excellent dielectric strength makes High Modulus PTFE on excellent insulation tape. When used as a roller wrapping tape, it prevents polyethylene buildup on laminating rollers. Meets Specs: MIL-I-23594C, Type I or II, Various Classes. Detailed specs available on request.

2 mil Kapton film; silicon adhesive. Provides the best Class 180 insulation available. Typical applications include wrapping and splicing of wire and cables, and as a mask for wave soldering of printed circuit boards. Superior dielectric strength; excellent tear and abrasion resistance. Detailed specs available on request.

Premium grade; 2 mil low elongation, cast OPP film; natural rubber adhesive. Used in both manual and automated carton sealing applications; same application as #735

High performance grade; 2 mil polyester film; natural rubber adhesive. Very rigorous tape for manual and automated carton sealing applications. Meets Specs: UFC Rule 41; DOT Spec 12B for hazardous shipments.

2 mil skived PTFE; acrylic adhesive. Higher elongation with greater conformability than High Modulus PTFE. Good strength, abrasion resistance and the low friction properties of Skived PTFE make it a prime choice for mechanical applications, from lining guide rails to wrapping airframe wire harnesses. Detailed specs available on request.

2 mil skived PTFE, silicone adhesive. Higher elongation with greater conformability than High Modulus PTFE. Good strength, abrasion resistance and the low friction properties of Skived PTFE make it a prime choice for mechanical applications, from lining guide rails to wrapping airframe wire harnesses. Detailed specs available on request.

Premium grade; 20 mil PVC film; PSA. Premium grade tape with non-corrosive adhesive and thicker backing than #721 for wrapping pipes to prevent corrosion.

20 mil UHMW polyethylene; rubber adhesive. Same thickness available in acrylic adhesives when required. More abrasion resistant than PTFE with excellent properties. Resists puncture and gouging under pressure and load. The ideal choice to prolong the life of conveyor belts and to protect chute guide rails and bearings. UHMW/Polyolefin is FDA approved and suitable for temperatures up to 225 degrees F. Detailed specs available on request.

General purpose grade; 25 micron cast biaxially-oriented polypropylene (BOPP) film; aggressive, synthetic rubber/resin hot melt adhesive. For sealing of light weight cartons with minimal exposure to handling, shipping and load stress. Meets Specs: CID-A-A-1684C; ASTM-D1974.

3 mil dead soft aluminum foil; acrylic adhesive; no release liner. Specifically designed for economical harness wrap applications, heat reflection, masking and duct sealing; adhesive creates superior bond and sticks to itself well.

3 mil dead soft aluminum foil; acrylic adhesive; paper release liner. Specifically designed for economical harness wrap applications, heat reflection, masking and duct sealing; adhesive creates superior bond and sticks to itself well.

3 mil dead soft aluminum foil; aggressive acrylic adhesive; no release liner. Designed for use on variety of flat, irregular or curved surfaces far vapor barrier protection, waterproof sealing, heat reflection/dissipation, masking for paint stripping and electroplating; has high-adhesion to backing; may be applied at low temperature; good high/low temp resistance. Meets Specs: L-T-80B, MIL-T-23397B; AMDT 2 TYPE II.

3 mil dead soft aluminum foil; aggressive acrylic adhesive; paper release liner. Designed for use on variety of flat, irregular or curved surfaces far vapor barrier protection, waterproof sealing, heat reflection/dissipation, masking for paint stripping and electroplating; has high-adhesion to backing; may be applied at low temperature; good high/low temp resistance. Meets Specs: L-T-80B, MIL-T-23397B; AMDT 2 TYPE II.

3 mil high modulus PTFE; acrylic adhesive. PTFE coated fiberglass tapes are designed to operate in demanding temperatures and chemical environments. The unique properties of PTFE are joined with the exceptional strength and durability of glass fabric making it ideally suited for a variety of industries including packaging, aerospace and electronics. Detailed specs available on request.